# NOMOS Glashütte Tangente Neomatik 39 Reference 140 4K Watch Review

**Channel:** WR4K
**Source:** https://www.youtube.com/watch?v=4PQjXSKWk8U
**Transcript page:** https://www.withtranscript.ai/video/4PQjXSKWk8U

## Chapters

- 0:04 — Unboxing and Included Accessories
- 3:18 — Case, Strap, and Dial Details
- 14:25 — Strap Underside and Crown Review
- 18:10 — Movement Operation and Case Back
- 29:34 — Wrist Fit, Comfort, and Wearability
- 37:04 — DUW 3001 Movement Excellence
- 42:29 — Final Verdict and Value Assessment

## Transcript

**[0:04]:** Good afternoon. Today I'm going to be reviewing the Nomos Glashütte Tangente Neomatik 39 reference 140. This watch is available from nomos-glashuette.com for 3,260 euro. So firstly, let's look at the box that the watch comes in and then I'll take you through the specifications of the piece. So the watch comes in a solid wooden watch box, which is housed inside this outer black cardboard sleeve. On the top of the sleeve, we have the Nomos Glashütte logo embossed. So I'll remove the sleeve and this is the solid wooden watch box itself. Matte black grain finish to it with a contrasting Nomos Glashütte logo printed in metallic blue. So stainless steel hardware, we have a stainless steel push button lock and also stainless steel hinges. Excellent quality, matte black grain finish to it, has some heft to it and they deserve credit here because Nomos Glashütte could have taken the less expensive default option of using a plastic or cardboard watch box, but this solid

**[0:57]:** wooden watch box is high quality. So one depresses this spring-loaded stainless steel lock and the interior is upholstered with black velour fabric to a good standard. On the underside of the hinged lid, we have an elasticated strap which secures the warranty card envelope and in the base, which is also upholstered with black velour fabric, we have two elasticated straps which secure the piece into the base, protecting it in shipping from moving around and being damaged. Excellent quality, snaps shut with a nice positive click with a spring-loaded lock and this is immediately giving the impression that this Nomos Glashütte Tangente Neomatik 39 is a high quality German-made piece. With regards to the items that come with the piece, it comes with this cardboard envelope which says important warranty documents. On the reverse, it says Nomos Glashütte in silver. So it contains the warranty card and as you can see, it details the model which is the Tangente Neomatik 39, the reference number 140, also the serial number of the piece and also the caliber, which is the DUW

**[1:53]:** 3001 automatic. There's also a QR code on the right hand side, so I can scan the QR code to activate the 2-year international warranty from the date of purchase using an Android or iPhone. And also, it downloads the terms and conditions of the 2-year international warranty. On the reverse, it's filled in with the date of purchase, also signed, and also stamped by Nomos Glashütte. And again, it has a QR code which can be scanned with an Android or iPhone. Excellent. One also gets this Nomos Glashütte branded microfiber polishing cloth. I always think it's a nice touch to get a branded microfiber polishing cloth irrespective of the price point of the piece. Now, there is one item which is notably absent, and subjectively I'm going to be critical of that. I'd like to see, regardless of price point, low tier, mid tier, and high tier respectively, an owner's instruction manual.

**[2:42]:** Either in the form of a printed booklet, or alternatively a card, a plastic or cardboard card with a QR code which can be scanned and download the owner's instruction manual detailing the operation of the movement used, which is the Nomos caliber DUW 3001 automatic. But, nonetheless, one can download the owner's instruction manual via the website nomos-glashuette.com, which is fair enough. But, that's the only thing that's absent. Good to see 2-year international warranty nonetheless, because that seems to be standard and mandatory for mid tier pieces between 0 and 500 euro, and this is 3,260 euro, so it's to be expected.

**[3:18]:** So, with regards to the specifications of the piece, we have a 38.5 mm case diameter. We have a lug-to-lug of 47.3 mm, a thickness of 7.3 mm, and a lug width of 19 mm. Now, this is the one negative of the piece I want you to be mindful of. It has an odd 19 mm lug width. Now, just to clarify, in the 1960s and 1970s, 19 mm was a popular lug width. However, in contemporary standards, in 2026, there are two industry standard lug widths, 20 and 22. So, this is a 38.5, therefore one would expect 20 mm. The problem with the 19 mm odd lug width is it does limit one's strap options. Now, this does come on a very high quality genuine Horween Shell Cordovan strap, but it would be better if it had a 20 mm lug width just to give more options if one wants to exchange the strap for

**[4:10]:** an alternative, but that's what we have nonetheless. So, genuine Horween Shell Cordovan strap, matte black grain finish to it, matching stitching on the edges, and it tapers from 19 mm at the lugs down to the winged buckle and tang. Winged buckle and tang is solid 316L grade stainless steel, flawless mirror polishing to the top side, underside, and flanks, and it's engraved with high definition engraving and signed with the Nomos logo. Nice curvature to it, no sharp edge to the undercuts, no sharp corners, and it's been beveled and deburred to the highest standard. To put this into perspective, the quality of the finishing and the build quality of this winged clasp is high tier level, make no mistake. This winged buckle and tang does not say to me mid-tier, 500 to 5,000 euro. This is high tier, 10,000 plus euro level winged clasp finishing. Excellent. And it matches the quality of the genuine Horween Shell Cordovan strap.

**[5:04]:** This is the very highest quality leather, Horween Shell Cordovan, which is tanned in Chicago. This is as good or better as the very best of Hirsch calf leather straps. It's fantastic. The thing I most like about Horween Shell Cordovan straps is the durability. They are incredibly durable with daily wear and tear, unlike lower grades of calf leather straps. So, beautiful sheen to it, although it is matte versus being glossy, and of course this fits the piece being a Bauhaus piece and a daily wear piece which could potentially be worn as a dress piece. So, we have a flat sapphire crystal with clear AR coating on underside, and the clear anti-reflective coating does an outstanding job of reducing the glare and the highly reflective nature of the heat treated blued handset. So, to clarify, the main hands for the hour and minute hand and also the sub-dial second hand are proper blued hands.

**[5:54]:** Now, what I mean by proper blued hands is they're not anodized blue, they're not painted blue. These are blued hands with heat treatments. And this is fantastic. The quality of the heat treatment to the blued hands is stellar. It's something that Nomos Glashütte do to a very high standard. And again, the handset polishing and also the heat treatment of the hands is high-tier level. Make no mistake. Again, this is not mid-tier level 500 to 5,000 euro hand execution. This is high-tier level 10,000 plus euro level quality. At the 3,260 euro price point, it's something that Nomos Glashütte do to the highest standards. Now, the dial is galvanized and it is white silver plated. And I can tell you this is some of the best dial execution I have seen in the mid-tier. Between 500 and 5,000 euro, again, it's something that Nomos Glashütte do to the highest standard.

**[6:46]:** This says to me 10,000 plus euro level dial execution. And what I'm referring to with dial execution is the galvanized dial and the white silver plating of it is stellar. The printing of the Bauhaus dial is absolutely fantastic. The definition of the font is pure Bauhaus. And it's high definition, it's crisp, it's sharp. The font isn't too thick and blurry. What I like about the dial is it's symmetrical. Rather than having an asymmetrical dial, for example, with a date complication at 3:00 or 6:00, this dial is symmetrical. This is pure Bauhaus design personified. The font, the size of the printed indices, the black minute ticks on the chapter ring, and the smaller Arabic numerals on the chapter ring. Everything about this says to me purity. It's pure Bauhaus. This is something that Nomos Glashütte do to the highest level. What I like about the dial is the execution in terms of the balance.

**[7:36]:** Because we have three lines of text on the dial, Nomos Glashütte and and Neomatik is in gilt to add interest, but it's balanced because we have the sub-dial at 6, which is recessed into the main dial, and it's absolutely fantastic the quality of the minute six, and also the second ticks on the sub-dial. What I like is the symmetry of the sub-dial itself because we have 60, 15, 30, and 40 Arabic numerals. So, perfectly asymmetrical. This is an example to other mid-tier brands and mid-tier mic brands of how to get Bauhaus design perfected. Either side of the 6 o'clock index, which is the 30 Arabic numerals, we have made in Germany. Now, I would prefer if they used the German spelling of made in Germany, "hergestellt in Deutschland", because of course Nomos Glashütte pieces and their in-house calibers are made in Glashütte, Germany. Nomos Glashütte is in German and Neomatik is German.

**[8:27]:** I think that there's a clash with the language because it says made in Germany. It should have "hergestellt in Deutschland", but this is subjective. I'd be safe for the majority of collectors, it's not detrimental. But, fantastic dial. Flat sapphire crystal is one of my favorite aspects of the piece because it has a large bevel on the edge. Now, to clarify, with regards to sapphire crystals, there are two types of edge finishing, fillet and also bevel. Now, with box top hat double dome sapphire crystals and double dome sapphire crystals, they usually have a fillet edge. Fillet means curved versus flat, which is bevel. With a flat sapphire crystal like this, the correct edge choice isn't fillet, it's bevel. So, the edge of this crystal has a flat edge to it, and what I like is when one tilts the piece at an oblique angle, one can see the way the fillet the sorry, bevel edge catches the light,

**[9:17]:** and I like its low profile. This piece is only 7.3 mm. Just think about that for a moment. 7.3 mm is the kind of thickness one would expect with a quartz powered piece or a mechanical manual wind movement piece, not an automatic with a rotor. 7.3 is exceptional, and of course, needless to say, this enhances comfort level and feel-good factor, but from an aesthetic perspective, this has a very thin, flat sapphire crystal, and also a very thin rehaut. This is something I like about Nomos Glashütte, and specifically this reference 140 version of the Neomatik. It's got one of the thinnest rehauts. This is the kind of slender rehaut one gets with a Rolex piece. And again, this is why I keep reiterating everything about this piece does not say to me 500 to 5,000 euro mid-tier piece. Everything about this piece says to me 10,000 plus euro level high-tier piece.

**[10:10]:** Because we're all familiar with a problem. Often mid-tier pieces and mid-tier microbrand pieces have a deep rehaut, regardless of the caliber used, whether it's a quartz-powered, mechanical manual wind, or automatic caliber, respectively. They often have a deep rehaut, and therefore the dial and the handset are too far away beneath the sapphire crystal. And it's wholly unnecessary because the second hand, in the case of a three-hand stack height on the cannon pinion, and in this case a two-hand stack height on the cannon pinion with a subdial at 6, which is recessed, one doesn't need to have such excess clearance between the underside of the sapphire crystal and the handset. And it's detrimental because the problem is the legibility is reduced, the functionality is reduced, the sapphire crystal sits too far away from the dial, and of course there's more reflection on the underside of the sapphire crystal, regardless of

**[10:57]:** AR coating. This is Rolex level because look how thin the rehaut is. Incredibly low profile. This sapphire crystal sits very close to the handset, sits very close to the dial. Therefore, legibility, readability have been maximized to the highest level. When one looks at the piece straight on, this sapphire crystal has such perfect clarity, and the AR coating has such perfect clarity, the sapphire crystal looks invisible. It looks like there is no sapphire crystal. So, when looking at the blued hands and also the galvanized white silver plated dial, it's perfectly legible. The Bauhaus Arabic numerals are clearly legible. It's just fantastic. So, I really like the low profile rehauls, and of course that helps to reduce this piece down to only 7.3, which is incredible for an automatic. So, excellent crystal, excellent beveled edge to it. The bezel, the case, and the case back are made from solid 316L grade stainless steel.

**[11:53]:** Angular lugs, which of course are an iconic design elements of the Neomatik series. The Tangente always has angular lugs, which are straight. And again, this is pure Bauhaus design. The angular profiles are brutalist, and everything about this piece says to me purity. It is the purest Bauhaus design I've seen. And of the different versions of the Tangente Neomatik, I've reviewed a plethora of them over the years, this is my personal favorite of them all. Because what we're looking at here is peak Nomos Glashütte, the very best of Nomos Glashütte distilled into this one piece, the Tangente Neomatik 39, reference 140. In between the lugs, it's mirror polished to the same high standard as the top of the bezel, the side, and the flanks of the case. Now, when I'm looking at a mirror polished piece, to clarify, the first area I look at is the mirror polishing in between the lugs on the 12, and again on the 6:00 side.

**[12:45]:** Reason being, with mid-tier pieces and mid-tier microbrand pieces, often it's an area that brands and microbrands use as a production cost-cutting measure. Because it's mirror polishing in between the lugs adds production time per piece, and therefore adds production cost per piece, therefore diminishes profit margin per piece for the brand or microbrand. So, what they often do is they'll simply brush satin finish, or alternatively just machine in between the lugs. They will not mirror polish in between the lugs to the same standard as the bezel, the case, and the case back. Needless to say, Nomos Glashütte do not do that. This does not have any production cost-cutting measures whatsoever. The mirror polishing in between the lugs is done to the same high-tier 10,000-plus euro level as the bezel, the case, and the case back, and also the winged clasp on the Horween shell cordovan strap. Stellar.

**[13:34]:** This is as good, if not better, than Grand Seiko Zaratsu-level polishing. That's the level of polishing. It's as good as Rolex mirror polishing, the very best. So, this is why I say what we're looking at here is peak Nomos Glashütte, the very best. It's some of the best mirror polishing I've seen. I've reviewed a plethora of their pieces over the years. This is the greatest of them all, my personal favorite. Mirror polishing to the flanks is absolutely incredible. Mirror polishing to the edges of the bezel is incredible. Flanks of the lugs with the angular profile, as per all Tangente models, are mirror polished. No sharp edges, no sharp corners. The bevels are deburred to perfection. Pierced lugs look aesthetically pleasing, but of course is beneficial because it means one can easily depress the spring bars externally if one wants to exchange the Horween shell cordovan strap.

**[14:25]:** So, let's look at the underside of the strap in detail. Genuine Horween shell cordovan strap. What I like is it's got the dyed green underside to it. Flawless stitching around the perimeter, no loose stitches. There are enough holes in it to size it from a 6-7.5 inch wrist size. Good attention to detail because it is the boss with Nomos Glashütte. Now, there is one negative subjectively I'm going to be critical of. We have standard stainless steel spring bars. Now, yes, one has to be magnanimous because as I've detailed, we do have the benefits of pierced lugs with holes in the flanks. Therefore, strictly speaking, that does negate the need for spring bars at all if one wants to exchange the strap for an alternative. That's fair enough. But, in all cases, I prefer to see a strap with quick-release stainless steel spring bars because that negates the need for a spring bar at all.

**[15:16]:** So, I'd like to see Nomos Glashütte upgrade this or update it to quick-release stainless steel spring bars, but of course, we do have the pierced lugs. But, quality of the underside is as good as the top. Perfectly smooth. The dyed green underside liner to it has a beautiful smoothness to it. And what I like about genuine Horween Shell Cordovan straps is, like the very best of Hirsch calf leather straps made in Austria, they're immediately soft and supple. One doesn't have to break them in. This feels as soft and supple as a top grain leather strap which has been well worn which which is well broken in from wearing 8 to 12 hours per day. That's the feeling of it from day one. One gets the feeling that it's very soft and supple. It's not a thick, stiff, padded leather strap that one has to break in.

**[15:59]:** And, of course, it's not uncomfortable. From day one, this is as comfortable as wearing it for years. And the durability of Horween Shell Cordovan is fantastic. They're incredibly robust. And even at the spring bar end, where it is, of course, stiffer because it's thicker, it's still very soft and supple. The scent of the Horween Shell Cordovan is just fantastic. It smells good. It looks good. It feels good. No sharp edges to the flanks. It doesn't scratch the wrist. Very soft and supple. And it's got a nice subtle sheen to it. It's not glossy as per dress watch strap. It's got a subtle sheen to it. Absolutely gorgeous. Let's look at the buckle and tang side. And as you can see, good attention to detail because it's embossed with genuine Horween Shell Cordovan which confirms it. And it's also embossed at the spring bar end with handmade in Germany.

**[16:47]:** And again, I'd prefer if it were the German spelling of made in Germany, hergestellt in Deutschland, but this is subjective. But, it's good to see it confirmed. Handmade in Germany and genuine Horween Shell Cordovan. It's just fantastic. Everything about it. This is an appropriate strap. It actually exceeds the price points at 3,260. This strap is good enough on a for a 10,000 plus your high-tier piece. And to see it used on a 3,260 or a mid-tier piece is a credit to Nomos Glashutte. No production cost cutting measures whatsoever. One keeper. I prefer to see two keepers, but this is subjective. Now, of course, one has to say, well, this doesn't just have a regular buckling tang. It's a winged buckling tang, and we've got two sides to it. So, of course, that does reduce the amount of space they've got on the buckling tang side.

**[17:38]:** I prefer a conventional buckling tang, which has two keepers with the conventional first keeper being fixed, stitched either side, and the second keeper sliding. But, strictly speaking, one doesn't need that here because we've got the winged clasp. So, the end of the strap is secured by the the other side of it, the winged clasp versus a standard buckling tang. Therefore, doesn't need the first fixed keeper. Comes down to your personal taste. I prefer standard buckling tang. The winged clasp is, of course, very aesthetically pleasing, and second keeper is correctly proportioned. Fantastic strap. I really like it. Right.

**[18:10]:** So, let's test the push-pull crown execution. Just bear with me. I'll do back up the strap to make it easy to handle the piece. So, solid 316L grade stainless steel push-pull crown, coin edge finished. Large chamfer, which deletes the tips of the coin edge teeth. Correctly proportioned. It's not oversized as per a dive watch crown. The benefit of that is when one flexes the wrist, it doesn't dig into the back of the hand. Comfort level and feel good factor are therefore optimized. Mirror polished Nomos cap, and it is signed with a Nomos logo with high-definition engraving. Stellar finishing. So, push-pull crown provides 50 m of hermetic seal, which is perfectly acceptable for daily wear or dress piece. As it's a push-pull crown versus a screw-down crown, in the closed position, one can manually wind the Nomos caliber DUW 3001 automatic to its maximum 43-hour power reserve.

**[18:59]:** This feels incredibly smooth. To put this into perspective, it is as smooth as the Rolex caliber 3235 movement used in my Starbucks. That's the level of smoothness. It's much smoother than an SW200-1, much smoother than a 9015, and even smoother than a Sellita caliber SW300-1, which is a level above the 200-1 in refinements. That's the level of smoothness, and it's one aspect I really like about the caliber DW3001. Its refinement is so smooth. The manual winding just feels incredibly present pleasant because it doesn't feel rough, it doesn't feel gritty as per PT5000, it doesn't feel stiff. One can feel the tension in the mainspring gradually building up to its maximum 43 hours. But from the first turn to the 40th turn, it's got that same smoothness. And it really is equal to Rolex caliber such as the 3235 in terms of smoothness. The level of refinement is just sublime.

**[19:59]:** So very pleasant to manually wind. Pulling this out to the first click position hacks the movement, and it's a no-date complication caliber. So we're now in the time setting position. And actually it's very smooth. Very pleasant to to set the time. Pleasant. Now, when I talk about the resistance in the hand sets, I'll put it into perspective. It doesn't get lighter, and also it doesn't get heavier through the 12 hours of rotation or the 360° of rotation. It feels very well balanced. And again, this is a level above the resistance of a caliber SW200-1 or a caliber 9015. It feels similar to an SW300-1 in terms of smoothness, in terms of balance. And again, it's something I really like about it because the balance is very well perfected. It doesn't feel too heavy or too light. It feels smooth, but it's just got the right amount of friction in it.

**[20:55]:** And what I like about it above all else is the lack of back play. This is the benefit of this caliber, the DW3001 being made in-house in Glashütte by Nomos because the refinement is there. There's a mechanical reason which I reiterate. You'll often have heard me talk about this in my previous reviews, but I'll reiterate it for the benefit of those who have not heard it. With gearing, the winding gears, there needs to be some clearance between the tolerances of the teeth meshing against each other because if the teeth of the gears mesh perfectly and they didn't have the clearance, the problem is when one pushes the winding stem back into the caliber, it causes the winding gears to jump out of position either clockwise or anti-clockwise when the teeth on the gears mesh perfectly. So, there is a mechanical reason or a technical reason for there being some clearance in the tolerances of the teeth, but Nomos minimize it.

**[21:47]:** So, it doesn't have a lot of slack. And when one rotates the coin edge crown clockwise and anti-clockwise, there's an immediate response to the minute hand. You can see. This has less back play than an SW200-1, a 9015, and less back play even than an SW300-1. It's just fantastic. The way you rotate the crown and the immediate response to the minute hand is just so pleasant. And that's what I like about it. It's just so refined. Pushing it back in, it's got a nice positive click. That restarts the caliber. If you look at the sub-dial second hand, you can see it begins to sweep around at the characteristic 3 Hz sweep. Now, you again you'll know this from my previous reviews. Subjectively, I prefer a 4 Hz sweep for two reasons. Aesthetically, 4 Hz looks smoother than the subtle judder of 3 Hz. The second reason is 4 Hz is the perfect balance between power reserve and accuracy.

**[22:39]:** However, I do appreciate the reason why they've selected 3 Hz. This does have a higher power reserve of 43, and of course, this is incredibly accurate. It's regulated in six positions to chronometer limits. But, the other reason is it's a very thin caliber. It's only 3.2 mm thick. And the benefit of that is this piece is reduced to only 7.3 as a result. So, the benefits outweigh the negatives. Subjectively, one could say, "Well, the second-hand stuff or judges is not as aesthetically pleasing as four hands." Yes, that's a given. But, the benefits is they've been able to reduce the caliber to only 3.2, and therefore the benefits outweighs the negative. So, yes, there are positives and negatives to it, but I prefer four hands just from aesthetic purpose, and of course, power reserve and accuracy balance purpose, but benefits of thin caliber outweighs the forementioned.

**[23:28]:** But, manual winding works well, setting the time works well. It's fantastic. The very best of Nomos Glashütte. The caliber DUW 3001 is my favorite Nomos Glashütte caliber of them all. I've reviewed a plethora of their pieces over the years. It's the very best. So, let's look at the exhibition case back in detail. 50 m of hermetic seal, perfectly acceptable for a daily wear piece. Now, it's a pressed-on case back. Again, subjectively, one could be critical of this and say, "Well, a screw-down exhibition case back or a screwed-down exhibition case back." And I'll clarify what I mean between the difference. Screwed-down case backs are used on dive pieces, for example. So, with a screwed-down case back, one has an external thread cut into the stainless steel portion of the case back, and an internal thread cut into the case. And the internal thread meshes or mates with the external thread.

**[24:20]:** This is an alternative, the pressed-on case back, because the benefits of it is that it can be made thinner. The stainless steel portion can be thinner, and also the sapphire crystal glazing can be made thinner. So, overall, the thickness of the piece can be reduced to only 7.3. That's the benefit. But, the negative is they don't provide the same effective hermetic seal. So, a screw-down case back is better. One can have 200 or 300 m as per a dive piece. The other alternative is a screwed-down case back, where the stainless steel portion has four flathead screws, for example. That's often used on daily wear or dress pieces like this. They could have used that. The negative is the stainless steel portion would need more meat because they're going to have holes drilled in it. Of course, that weakens it. The stainless steel portion therefore needs to be thicker.

**[25:05]:** And of course, that would add thickness to the piece, which is detrimental. In this case, yes, it's correct to use a pressed-on case back because it's very thin. And the sapphire crystal glazing can sit very close to the rotor without the rotor fouling it. And when you look at it straight on, it looks invisible. So, the clearances are minimal. And of course, when I took the piece at to no oblique angle, you can see the benefit. This is not a bubble back case back. This is one of the flattest, one of the thinnest case backs I have ever seen with regards to exhibition case backs, low-tier, mid-tier, high-tier, regardless. This is incredibly thin. What I like about this piece is how tight the tolerances are. The sapphire crystal sits so close to the rotor, it looks like it's touching it. And this is something that Nomos Glashütte can do that other mid-tier brands and other mid-tier market brands cannot do between 500 and 5,000 euro.

**[25:58]:** Often with exhibition case backs, the sapphire crystal will have excess clearance in order to prevent the rotor fouling the underside of the sapphire crystal. Nomos Glashütte reduce the tolerances, the clearances to the absolute minimum. And to remind you, to reiterate, they do it on the front and the back because you can see same applies to the hand stack heights. Look how thin the rehaut is, Rolex level thinness. So, the sapphire crystal on the front sits very close to the minute's hand on top of the cannon pinion, minimal clearance, like it's touching it. So, that reduces thickness on the front. They also reduce the thickness on the back because the sapphire crystal sits so close to the rotor, it's almost touching it. And overall, the cumulative effect is this piece can be reduced to only 7.3, rather like a quartz or a mechanical mi- mechanical manual wind movement without a rotor.

**[26:50]:** 7.3 is just incredible for a 43-hour power reserve piece. So, this is one of the best, if not the best, pressed-on exhibition case backs I've seen. The other thing I like about it is the large diameter of the sapphire crystal glazing because it fully displays the decoration of the caliber. On the main plates, we've got côtes de Genève finishing, and beneath that, we've got perlage finishing, and then the skeletonized rotor also has côtes de Genève. And the main plate and also the rotor are engraved and then infilled with gilts. This says to me high-tier level, 10,000-plus euro level movement finishing, movement decoration, and needless to say, build quality, quality control, materials, and finishing are also 10,000-plus euro high-tier level. It's an in-house caliber, but it just looks absolutely beautiful to look at, and that's what I like about the large diameter of the exhibition case back.

**[27:46]:** The sapphire crystal glazing is large enough to fully display the blue screws, the côtes de Genève, the perlage finishing beneath the balance wheel, and of course the skeletonized rotor. Everything about it is very well displayed, and it's perfectly smooth, perfectly flat. Around the circumference of it, the stainless steel portion, we simply have the water resistance rating, 5 ATM, which denotes 50 m, and Tangent with a serial number, 7005, which matches the warranty card. This is minimalist. They haven't over-branded the pressed-on case back with excess specification, which is negligible. For example, they don't need to engrave with automatic, they don't need to engrave made in Germany, and other unnecessary specification. Simply 5 ATM, the water resistance rating, which is relevant, and the model, Tangent, and the serial number. Again, this is pure Bauhaus design. Bauhaus should be minimalist. So, rather than engraving loads of text around the circumference, it just simply has water resistance rating and Tangent with the serial number.

**[28:44]:** Perfection personified. Large chamfer to it, which is mirror polished to perfection, no sharp edges. So, not only does it look fantastic, it feels fantastic. This enhances comfort level and feel good factor because the case back feels perfectly smooth. And of course, when wearing the piece for long periods of time, it optimizes comfort level and feel good factor. Underside of the head of the piece is mirror polished to high tier level. And the straight angular lugs, which are brutalist, they are deburred and beveled very well. No sharp corners, no sharp edges, and they're nice and thin. So, this really does say to me pure Bauhaus design. Fantastic case finishing, fantastic case back finishing, everything about it is stellar. Just a shame it doesn't have quick release stainless steel spring bars, but we do have pierced lugs, which is fair enough. So, I'm going to give you a wrist shot now.

**[29:34]:** Just bear with me. I'll remove my Concord 40.

**[29:39]:** Now, to clarify, this genuine Horween shell cordovan strap with a wings clasp is long enough to fit a 6 to 7 and 1/2 inch wrist size. Now, you can see I can just engage the end I'll just move the keeper out of the way to do it better. I can just engage the end of the strap in the first Sorry, I was going to say first keeper because it becomes force of habit. I reviewed so many watches with buckle and tangs and with the first fixed keeper and a second sliding keeper, but actually becomes force of habit to say first keeper. So, I can engage the end of the strap in the wings clasp. As you can see, the tip of it, but it's a fraction too short to engage it in the second sliding keeper. So, this would be beneficial if I had a longer strap for an 8 inch wrist by 1/2 an inch, but I appreciate for the majority of collectors with a 6 to 7 and 1/2 inch wrist size, this will

**[30:32]:** suffice. So, therefore, I'm not going to be heavily critical of it. It looks fantastic, that's the point. The wing clasp makes a refreshing change from a standard buckle and tang. And you can see, mirror polishing is stellar. And it just looks fantastic. Curvature is good. It's low profile. It's not too bulky. And the quality of the polishing is exceptional. Taper is good. It's not too tapered. It's not aggressive. It's nice straight parallel gradual taper. But the only thing I dislike as I've detailed is the 19 mm because it's odd. Yes, it was popular in the 1960s and 1970s. It was actually an industry standard in that period. But since 2026, 20 or 22 are the industry standards. This would look better visually, but also be more practical in terms of interchangeability options if you were 20. And I think a 20 would suit a 38.5, which is close to 39.

**[31:23]:** So to clarify, for a 38, 39, 40, I regard 20 as correct. For a 41, 42 plus, I regard 22. In the case of bracelet tapers, needless to say, 39 should have a 20 to 16 perfection personified taper. 41 case should have a 22 to 18. They are the two industry standards. 19 is just odd. Subjectively, some collectors, some Nomos Glashütte purists will like the 19. It is a vintage size, of course, and it does give this piece of vintage aesthetic. And of course, yes, it's Bauhaus. It's minimalist. Narrow lugs as per all Tangent models. Brutalist angles. And of course, slender strap does enhance it from an aesthetic perspective. But just in terms of interchangeability options, I'd prefer 20. But two things I like about this piece above all else. Number one, lack of thickness. 7.3 mm. I keep reiterating it, but it's my favorite aspect of this piece above all else.

**[32:25]:** Just look how flat it is. This is one of the thinnest automatic pieces I have reviewed. I reviewed a plethora of pieces on my channel over the last 6 years. Over 700 pieces. Low to mid to high tier. This is one of the thinnest at only 7.3. Now, if this were quartz powered, or if it were mechanical manual wind powered, it would not impress me. 7.3 is nothing special. Strictly speaking, anything below 10 is exceptional, but for an automatic, below 10 mm, yes, this does impress me. 7.3 is just incredible. Also, it has an exhibition case back, which of course adds thickness. And I want to give to you credit to Nomos Glashütte here, because they could have made an error here, as so many mid-tier brands, mid-tier micro brands make this fundamental error. Often what they do is, to give a piece of interest and aesthetic, they will use a box top hat double dome sapphire crystal, or alternatively a double dome sapphire crystal.

**[33:20]:** The negative is, with a double dome sapphire crystal, it will add 1 or 1.5 mm to the thickness. With a box top hat double dome sapphire crystal, it typically adds 2 mm to thickness. Therefore, this would not be below 10. It would be, for example, 11 or 12 mm. Too thick. But because it's got a flat sapphire crystal in the front and a flat sapphire crystal in the exhibition case back, and they're very thin because it's only 50 m, not 100, it's only 7.3. Look at how low profile the flanks are. Stellar. Angular lugs, which are brutalist, and again pure Bauhaus design, characteristic or elements of the Tangent series. They are very thin. They're not too block-like. They're not squared off. They're not too chunky. This looks fantastic. So, this really is purity of Bauhaus design. And the legibility is stellar. The galvanized white silver plated dial contrast very well with the heat treated blued hands.

**[34:13]:** Subdial is recessed. Legibility is stellar. Proportions of the Arabic numerals are correct. Symmetry of the dial is perfectly symmetrical. It's just a fantastic looking piece. Of all the Nomos Glashütte pieces I've reviewed over the last 6 years, over 700 pieces on my channel, this is the best Bauhaus piece I've reviewed. The best of them all. Peak Nomos Glashütte, the very best of Nomos Glashütte, the ultimate neomatik 39. Fantastic. Now, that's the first thing. So, lack of thickness. Second thing is 52 g of heft. This feels like wearing a Casio digital watch, like a Casio F-91W, which we're all familiar with. That's the lack of heft we're talking about. It feels like a resin case digital watch with a resin strap. 52 g. For an automatic with a sapphire crystal exhibition case back, it's just incredible. I would expect this to be 70 g plus in a 38.5 case on a Horween shell cordovan strap.

**[35:10]:** But, 52 g. Just incredible. So, needless to say, the benefits of it only being 52 is it enhances comfort level and feel good factor. It actually exceeds my expectations. If this were 65 or 70 g, it would feel like a very balanced piece. But, as it stands at 52, the head of the piece feels weightless. This feels like an invisible piece. The comfort level of this piece is so good. It actually feels like an invisible piece. It feels like you're not wearing a watch. So, the head of the piece perfectly balances the genuine Horween shell cordovan strap and the wings clasp. The strap and also the wings clasp has enough heft on it to balance the head of the piece because the head of the piece is so thin and low profile, it lacks heft. So, to clarify, this does not feel like a top heavy piece.

**[35:56]:** And it's a pleasant surprise. 52 g and of course 7.3. So, comfort level and feel good factor have been optimized in every aspect of this piece. It looks good, feels good, comfort level and feel good factor are 10 out of 10. They could not improve upon it with regards to comfort level and feel good factor. The only thing they could improve upon, in my opinion, is 20 mm lug width and I've I've detailed the reasons for that, but just a fantastic looking piece from every angle. Low profile. Now, needless to say, you'll know this from my previous reviews. 13 mm and below is the sweet spot for a piece that easily slip underneath a shirt cuff if you wear business shirts. This piece is versatile because it's so low profile it could potentially be worn as a dress piece, but ideally a daily wear piece.

**[36:41]:** It's well below 13. 7.3 mm. Fantastic. So, it will easily slip underneath the shirt cuff. It's the perfect daily wear piece as a result. Just fantastic comfort level and feel-good factor. Of all the Nomos Glashütte pieces I've reviewed over the years, this is the best, my favorite of them all. It It cannot be beaten. It really is the very best.

**[37:04]:** So, just bear with me. I'll put back on my Concord 40, and then I'll continue. Right, so there's no lume on the dial and hands, so therefore I don't need to do a lume test. So, I'll move on to the movement. Now, the movement is my favorite aspect of this piece. I'm going to put this into perspective. I've reviewed a plethora of Nomos Glashütte pieces over the years. Of all the calibers they make in Glashütte, this caliber DUW 3001 is my favorite of them all, and I will detail why that is. So, it has 27 jewels. It runs at 21,600 vibrations per hour and a frequency of 3 Hz. It has hand winding and hacking, which is a complication, and they work correctly as I've demonstrated. The one thing I like about this caliber, of all their calibers, above all else, is how thin it is.

**[37:51]:** 3.2 mm. That is just incredible. They're not buying in movements from Sellita and decorating them or modifying them. This caliber DUW 3001 was first produced by Nomos Glashütte in 2015. So, now in 2026, its reliability has been proven beyond question. It is incredibly well-built. The build quality, tolerances, quality control, materials, finishing, accuracy, every aspect of it is stellar. The very best of Nomos Glashütte in-house caliber making. So, the reliability is what I like about it. But, 3.2 mm above all else is just incredible. 3.2 is the kind of thickness one would expect with a mechanical manual wind movement without a rotor. To have a rotor on a 43-hour caliber at only 3.2 is something that Nomos Glashütte can do that so many other mid-tier brands and mid-tier market brands cannot do. They're having to buy in movements from Sellita, for example. They cannot build their own in-house calibers.

**[38:55]:** Nomos Glashütte have been building this caliber since 2015. They can do it to the highest standard. This is high-tier level caliber decoration, high-tier level build quality, high-tier level quality control, high-tier level accuracy, high-tier level refinement. Correct decision after correct decision. So, 3.2, 43-hour power reserve is excellent. It also features Nomos swing system escapement. So, what are the main benefits of that? Well, the Nomos swing system escapement is highly efficient. The other benefit is it's accurate. So, Nomos Glashütte regulate this caliber in six positions to chronometer limits of minus four to plus six. Now, I'm going to give credit to Nomos Glashütte again here because usually mid-tier brands and mid-tier market brands will regulate their movements to chronometer limits in five positions. That's industry standard. It's nothing unusual. And that's good. Minus four to plus six in five positions is correct. Nomos Glashütte go one above that.

**[39:56]:** Regulated in six positions to chronometer limits. This one is running consistently when fully wound to its maximum 43 hours to plus two seconds per day. Better than minus four to plus six chronometer limits. Plus two, 43 hours, and it's still only 3.2. It's bidirectional winding, so when the rotor winds clockwise and anti-clockwise, it winds in both directions. And to clarify, how many clockwise turns does it need if you want to manually wind it? 40 clockwise turns when the mainspring is fully unwound and the movement is static when it stopped dead will suffice. So, 40 clockwise turns on the crown will manually wind it to its maximum 43. You cannot over wind it and damage the caliber. That's something to note because it has a clutch release mechanism which releases excess tension in the mainspring. So, for example, if you're manually winding it and you lose count or accidentally exceed 40 clockwise turns, you're not going to damage the movements.

**[40:53]:** It's technically excellent. Now, plus 2 seconds per day, 43 hours, 3.2 thick, the very best of Nomos Glashütte. Look at the decoration of it. Blue screws, Côtes de Genève on the main plate, beneath the balance wheel we have perlage finishing, and the perlage finishing is high definition. This is some of the best Côtes de Genève, some of the best perlage finishing I have seen regardless of price point, mid-tier or high-tier. To put this into perspective, the decoration and the finishing to this movement throughout is Jaeger-LeCoultre Master Ultra Thin level, which is a 13,000 plus euro piece. I previously reviewed that Jaeger-LeCoultre Master Control Ultra Thin on my on my channel, and that had some of the best movement decoration I have ever seen. This is equal to it. The perlage finishing is Jaeger-LeCoultre level, the Côtes de Genève is Jaeger-LeCoultre level. That's what we're looking at here.

**[41:49]:** And that's a 13,000 plus euro piece. But this is not even 10,000. This is 3,260 euro. But we're getting a 10,000 euro level build quality, quality control, materials, finishing, decorated piece. Or sorry, movement. At 3,260, it's just incredible. And I absolutely love the movements. It looks good. The gilt inlay in the engraving on the rotor and the main plates is fantastic. Everything about it says to me high tier level. This caliber says to me 10,000 plus euro level. And they deserve credit they're able to make it in-house. They're not buying in movements. They're making them themselves in Glashütte. Fantastic.

**[42:29]:** Right. So, I'll just do back up the strap and then I'll summarize the piece. So, lastly I'll summarize the piece. What do I think of it overall? Well, when I'm considering reviewing a watch for my channel, the watch has to meet two criteria. It should be both excellent quality and excellent value at the respective price point. So, mid-tier piece, to remind you, mid-tier is 500 to 5,000 euro. 3,260 euro, we're well within the mid-tier. Every aspect of this piece is high tier level. Make no mistake, there are no quality control is defects whatsoever. The build quality, quality control, materials and finishing of this piece do not say to me 500 to 5,000 euro mid-tier level. What we're looking at here is a German-made piece made in Glashütte with an in-house German-made caliber made in Glashütte. Two years of warranty is the industry standard. That adds value to the piece.

**[43:25]:** They've been making the caliber since 2015. The reliability is proven beyond question. So, there are no reservations about the caliber whatsoever. It's not a new caliber with unproven reliability. Plus two seconds per day, regulated in six positions, 43 hours of power reserve, only 3.2 mm. This piece is only 7.3. And it's only 52 g. It's just correct decision after correct decision after correct decision. High tier level after high tier level after high tier level. The perfect piece. There is only one negative, which is the 19 mm lug width as I've detailed, but other than that, and I'm trying to be objective here. I'm trying to be unbiased. I'm trying to be fair and trying to find faults with it. Trying to be critical. There is no other negative. The 19 lug width is the only thing I'd change. Everything else about it is perfection personified.

**[44:19]:** The movement alone fully justifies the price points of this piece. And I think Nomos Glashütte have actually undervalued this piece. At 3,260 euro, I'm going to put it into perspective. With this caliber, if this were 5,000 euro, I would still say it is excellent quality and excellent value. If this were 6,000 euro, I would still say it is excellent quality and excellent value. But at 3,260 euro, it's just incredible. The value proposition of this piece is just stellar. We're not looking at a German-made piece with a SW200-1 or an SW300-1 Swiss-made caliber. It's an in-house caliber, which is technically excellent, only 3.2 mm, and only 3,260 euro. This should be 5,000 or 6,000 euro. That would be the correct price points. It's actually a level above in quality. It exceeds the mid-tier price point of 5,000. It's really a 6,000 level plus piece. But you're getting a mid-tier price point between 500 and 5,000, 3,260.

**[45:22]:** So, yes, I'm going to declare it excellent quality. Yes, I'm going to declare it excellent value. I'm going to declare it's a champagne watch for lemonade money. This is the very best Nomos Glashütte piece I have reviewed. The very best movements, the DUW 3001, it's stellar. So, I'm going to highly recommend it to you for consideration. I hope you've enjoyed my review of the Nomos Glashütte Tangente Neomatik 39, reference 140. Please feel free to post your comments below the video. Thank you for watching.
