# Vevor Chainsaw! Check These Things Before Going To The Woods!

**Channel:** In HIS Name Custom Design Minister
**Source:** https://www.youtube.com/watch?v=PoOTT4q_DMA
**Transcript page:** https://www.withtranscript.ai/video/PoOTT4q_DMA

## Chapters

- 0:04 — Checking and Gapping the Spark Plug
- 2:55 — Inspecting the Air Cleaner and Housing
- 4:30 — Installing the Bar and Chain, Mixing Fuel
- 8:15 — First Start and Adjusting the Oiler
- 13:02 — Maintenance Recap and Hatchet Giveaway

## Transcript

**[0:04] Speaker A:** Hey, before you take your new Viva out and cut a single piece of firewood, I want you to check these three things. It's going to save you a lot of time and possibly a lot of problems. You know, I'm fixing to give away this chainsaw. If you'd like something like this, leave a comment that says count me in and I'll put you in the drawing. And stay tuned. At the end of this video, I'm going to give away this hatchet to some lucky winner. There's three things we're going to take a look on this chainsaw. So, every time, whether it's a brand new chainsaw or whether you're going ready to use your chainsaw for the first time this year to go cut firewood, there's three things you need to check. One is the spark plug, the air cleaner, and then I'm going to show you how to adjust the oiler on the bottom of these chainsaws.

**[0:42] Speaker A:** Let's go ahead and check the spark plug real quick. You know, a lot of these chainsaws come with their spark plugs set at 12,000. You know, if you go back and watch some of my videos dead on arrival, you're going to see how to address some of these issues, but they're famous for coming set at 12,000. I don't know why they do that, they just do. So, what I want to show you is how to take a look at your spark plug. Now, you want to be careful when you break this loose. You do not want to break the porcelain on this spark plug. Now, I'm going to tell you this spark plug is on there pretty tight. Be very careful. I'm going to show you something real quick. Now, when I take this out, friends, it's probably going to be gapped at about 12,000.

**[1:17] Speaker A:** That's generally what they come as. They need to be 25,000 to start and burn the fuel efficiently. They may go and start at 12, but you may have trouble starting it when it gets hot. So, go ahead and gap it at 25,000. Now, as you can tell, I just took this out of the box. Let's see what it's gapped at. Brand new spark plug, never has started. I'm going to take my gapping tool and I'll put one of these gapping tools in the link, friends. You can tell it will just barely go in there. That's 10,000ths of an inch. Now, I'm going to move it around. Okay, right there is 15. Right there is 20. You can go ahead and just give it a little bit of a pry there. Come around. There's 20. Now, I'm going to go right in the middle between 20 and 30.

**[2:01] Speaker A:** Now, right there is 25,000. We're going to call that good. And that's going to be perfect right there. Now, these are what comes with them. You can buy NGKs if you want to put those in here. But for now, we're going to go ahead and put this one back in. Okay, so as we getting ready to tighten this up, like I said, I want you to be very careful when you snug it down. You know, it doesn't have to be just extremely tight cuz what can happen is when you tighten it down, one, you can strip the threads, and two, you can actually distort the spark plug. So, what I'm going to do is I'm just going to take it. I seated the gasket on there. I'm just going to snug it down to about just about like that right there. You Now, friends, I have another plug here real quick.

**[2:38] Speaker A:** If you break the porcelain, like this one is, it'll cause it to misfire. It may cause it to not start. And this is what happens when you get too rough with this. So, so be very careful when you put your spark plugs back in and when you take them out. You can crack this porcelain, then you ruin the spark plug.

**[2:55] Speaker A:** Okay, so we'll put it all back together. Now, the second thing we're going to check, we're going to check our air cleaner. We're going to make sure that it's clean, which this one is because it's brand new. And then you can see inside there, we're going to make sure our housing is tight, that it hasn't worked loose during shipment or that it was put on correctly. Just make sure everything looks good when you're looking in here. We can look at our choke right here. Be very careful. That thing can fall out, and then it can be kind of tough to get it back in there, but you can do it. And we're going to slide our air cleaner back on. Make sure it's seated. As you can see here, we've got a good seal all the way around. Just make sure it's tight. Make sure you haven't poked a hole in this.

**[3:36] Speaker A:** And you know, proper maintenance is key. These little saws will last a long time. I know people have problems every now and then, but you know what I found? The quality of these chainsaws is getting better better every day. You know, for 85 to 95 dollars for this top handle chainsaw, you really can't beat this at all. It will stay up with a lot of the pro type chainsaws. And if you get 4, 5, 6 years, some of my Beavers that you see, I'm going on 2 years with some of these saws. My top handle got over 2 years on it. I've not had one single issue with it. It's because I take my time, friends. I check things over. That's what I'm trying to teach you how to do. Look at my Beaver Chainsaw playlist. Go look at that. You know, one thing I want to show you.

**[4:18] Speaker A:** They start these from the factory. I don't know if you can see that. There is fuel inside there, right there. So, it shows you they start all of these when they leave the factory.

**[4:30] Speaker A:** Now, let's go ahead and put the chain and bar on real quick. Now, when we're taking these loose, you don't have to get in a big hurry. Just take your time. I know a lot of times we're ready to get out there and we're ready to go to work. Pro tip, make sure your chain brake is released. They come set just like this, okay? So, when you take this off, if it's set and this is pushed forward and this is triggered, you won't get it back on unless somehow you get this to reset. It will not go over the clutch. So, what we're going to do is we're going to release the chain brake by pulling all the way back. You can see that this trigger goes all the way down. And then we're safe to go ahead and take it off.

**[5:15] Speaker A:** Now, it'll slide right off. And we're good to go. Now, let's go ahead and take a look at this muffler right here. Now, this is a pretty good little opening for this particular saw. You can see right here you got your opening. It's just a wide open on the inside. It's got a outboard clutch and then you got your sprocket right on the inside, okay? Then your oil's going to come out of this area right here. You got your oil reservoir. And when we set the oil, we're going to come right here on an adjustment. We're going to set our oil flow. So, we'll be getting to that in just a second. Now, we're going to go ahead and get in our bag. Again, this is brand new saw. You just saw me basically take it out of the box. And I'm going to give this saw away, just like I said.

**[5:58] Speaker A:** So, leave me a comment if you'd like to have something like this. And then we're going to give away our hatchet, too, as well. So, what we have here is we have our chain. Cutters go towards the front. We'll go ahead and put our bar on. We're going to loop this in between our muffler and our sprocket. Slide your bar all the way to the back. Slip your chain over the end and then just pull it out where it's tight. Okay, as you can see, these have little dogs right back here. They loop in right here. It holds the back in. So, come right here. Put those in place. Out this little bit. There it goes. Now, that's perfect, friends. First time. Now, I'm not going to snug these down all the way. I'm just going to run them down finger tight and that allow my bar to move and tighten my chain.

**[6:49] Speaker A:** So, this particular saw has a side adjuster here. I'm going to use the one that come use the adjustment tool that comes with it. Hold up on my bar. Tighten it up just a little bit. And then I'll go ahead and just snug them down.

**[7:08] Speaker A:** All right, I'll rotate it just a few times. Be very careful so you don't cut your hand. I'm not going to get crazy. If you can't get it to move, loosen it back off. Okay? Don't cut yourself. You could actually put a pair of gloves on to do this as well. Okay, and that's it as far as assembling your chainsaw. Now, we're going to go ahead and check the oiler, but in order to check the oiler, I got to put fuel in it. Now, I run these saws at 40 to 1 mix. What I use is Husqvarna XP Plus. It's synthetic. This treats 2 and 1/2 gallons, but that puts it at 50 to 1. So, go ahead and empty this all the way into your fuel can. Put 2 gallons on top of it. Put the lid on and shake it up. That makes it 40 to 1.

**[7:48] Speaker A:** I always recommend 40 to 1 because that ensures that we get plenty of oil on our pistons and our rings and on our cylinders. All right, the fuel is on top. We're going to go ahead and fill this up. I'm not going to put a lot in it cuz this is going to be shipped. I will drain it back out to ship it. Now, Now, to go ahead and put oil in the bottom one.

**[8:15] Speaker A:** Leave me in the comments how many times you think this is going to take for this thing to start up. Brand new, never been started. First time it's had fuel in it. How many pulls, friends? That is off. Up is on. We're going to go ahead and pump this several times till we get fuel. There you go. You see fuel? Okay. I'm going to give it two or three more. I'm going to choke it. Okay, she's choked. How many pulls, friends?

**[8:54] Speaker A:** Now, I'm going to sit here and let it idle for a minute. I'm going to check the brake. I'm going to let this thing warm up. I'm not going to give it I'm not going I'm not going I've got this kind of on a high idle right now. And once I flip the trigger, it'll come down. Now, I'll just sit here and let it run for just a minute. And you can do the same thing with these big saws, even if you've had them for a couple years. You go through some of THE SAME CHECKS. YOU go through some of the same checks with all your saws before you start cutting wood. Go back through the spark plug, check it, make sure that it's clean between the electrode, make sure the gap is right. Check your air cleaner while you got it off, blow it out, which you should do every time.

**[9:44] Speaker A:** Go in there and check your chain, check take the guards off the sides of these, clean them all out, make sure everything is set. And then you're ready to go cut wood. These saws will last a long time. Like I said, the quality is coming up. I know three to four of years ago, um they were having a lot of trouble with them. But I'm here to tell you, friends, uh as a master ASC certified technician, these things are coming around. You know, I was an engine specialist for Caterpillar for several years. I have overhauled thousands of these engines. So, I'm here to tell you these things are getting better. And for less than $100, you really can't beat them. You know, 95% of the people who use chainsaws out there don't need a $700 saw. Now, if you want to go buy a new Husqvarna, and which you see a bunch of my stuff here in the back, I have pro level saws.

**[10:28] Speaker A:** I have pro steels and I have pro Husqvarnas. But, I'm here to help you, the average homeowner who may not have a big budget. So, if you go back and watch my videos and hang with me, like and subscribe to our channel, say count me in. And if you don't mind, hype this video. It helps get it out there. I will help you walk you through a lot of this process. There hasn't been any questions that I haven't asked. I've answered thousands of questions on these type of chainsaws, as well as the steels and the Husqvarnas. Like I said, I'm a master ASC certified technician. They call me the professor because I'm actually director of the largest automotive and small engine technology center in the nation. So, feel free to reach out. I love doing this, friends. Let's see if this thing will start again.

**[11:14] Speaker A:** And you really can't beat these saws.

**[11:22] Speaker A:** Now, let's see how well this THING IS OILING.

**[11:27] Speaker A:** OKAY, NOW THE OILER ON THIS SAW is right there. There's a little oil screw adjustment right here. If we turn it counterclockwise, back it all the way out, it's going to be maximum oil. Now, I haven't really got any oil up here yet. You can see that my chain is a little bit loose. That's fine. That's natural. We'll come back in here and tighten it up, but I'm going to leave it just a little bit loose so it doesn't wear things out right now. Now, this thing is turned It's the lowest oil setting. So, I'm going to go ahead and back this out to maximum oil. And we're going to see how much oil it puts out. And I may leave it like this through a tank of fuel again. And then I might adjust that and turn the oil flow back down to the chain.

**[11:58] Speaker A:** But, right now, I want to make sure my chain gets plenty of oil. Let's start it.

**[12:14] Speaker A:** We'll try here on the table.

**[12:22] Speaker A:** I think you see we got plenty of oil.

**[12:33] Speaker A:** All right, friends, do you think we got plenty of oil? All right, friends, as you can tell, we were getting plenty of oil. I am going to leave that right there. Matter of fact, my bar is oiling up very nicely. Now, what that tells me is I do not have to worry about this chain burning up. Now, later, I may come in here and I may turn that down just a little bit. Now, I got a little bit of oil right there, too, so that tells me it's getting plenty of oil. Now, you may want to come in here and adjust it down just a touch. But, right now, that's where I'm going to leave it.

**[13:02] Speaker A:** All right, friends, so you can tell, these Beavers will last you a long time. Just a little bit of routine maintenance, as you see, it didn't take me very long. It took me longer to shoot this video. You could do all that in about 5 minutes. Do that before you go the woods this winter, before you go cut your firewood. These saws will last you. Put fresh gas in them. If it's last year's gas, go ahead and pour it out. Put you some fresh gas in there, start it up, let it warm up, go through your cycles, make sure you're oiling properly, okay? Hey, friends, I hope this helped. Let's go ahead and give this away. This is going to go to Hey, Billy, if you're watching, hey, congratulations, buddy. I will send this to you. Hit me up on Messenger so I know what your address is, and I will send this to you.

**[13:44] Speaker A:** Hey, if y'all want a chance at winning something like this, this particular saw or another saw, say, "Count me in." It'll either be a little chainsaw like this or one of my 30s or 40s chainsaws I got back here, but I'm going to be giving one out before long, so say, "Count me in." Hype this video, subscribe to our channel, and please hit that bell notification so that you never miss another video. Hey, I appreciate you. Let me know if you got any questions, and remember, love God and love your neighbor.

**[14:25] Speaker B:** Hey.
