Transcript

Use with ChatGPT / Claude Auto-scroll A

1. Underwater Pressure and Body Safety

Introduces how pressure changes underwater and why it matters for divers. Explains squeezes, equalization, lung over-expansion, breathing rules, air consumption, buoyancy, and the importance of diving with a buddy.

0:35 - 1:46
it's exciting being a diver because underwater you experience new sensations you feel pressure swim almost weightless Li and see and hear things differently these results from the different physical properties that water and air have and relate directly toyour safety and enjoyment as a diver right now you're surrounded by pressure it's the weight of the atmosphere of air we call this one bar or atmosphere when you go underwater the water adds to this pressure 10 meters33 feet of water adds the same pressure as the one atmosphere of air so the pressure increases one bar or atmosphere for every 10 meters or 33 feet you descend increasing pressure doesn't affect water but it compresses agas like air so as you go deeper pressure reduces an air volume and increases its density by pushing the molecules closer together this pressure volume density relationship is important because it affects air spaces including your ears sinuses lungs
and mask it also affects controlling your buoyancy and how long your air last as shown here there's a relationship between the pressure and a gases volume and density at 10 meters or 33 feet the pressure is twice thesurface pressure so half the air volume remains and the density doubles the same relationship applies when you ascend as the divers ascend the gas reacts pand the surface but what would happen if the divers inflated a balloon andsealed it at depth then ascended the air would expand and burst the balloon to prevent this the divers must keep the balloon unsealed and released some expanding air as they ascend this is a very important concept will returnto shortly
as you descend water pressure compresses the air in your body air spaces when descending this primarily affects your ears sinuses and mask a squeeze is discomfort caused by the imbalance between the water pressure and the air space asqueeze can injure you if you continue to descend but you can prevent a squeeze by adding air to air spaces to balance the pressure this is called equalization equalize your ears and sinuses by blowing gently against your blocknostrils or by swallowing and wiggling your jaw blow through your nose into your mask to equalize your mask equalize frequently as you descend before you feel discomfort you shouldn't ever feel pain if you can equalize stop your descentsignal your buddies or the instructor they can't tell that you're having difficulty unless you do ascend slightly and try again if you still can't equalize discontinue the dive and try another day continuing to descend with unequal eyes air
spaces can lead to serious injuries a colder allergy that causes congestion can make equalizing difficult or impossible so don't dive until you're well equalize gently never attempt a forceful and or extended equalization a forceful extended equalization can causeserious permanent ear injuries ear plugs create an air space that you can equalize so don't use them while scuba diving increasing pressure may affect other body air spaces it's rare but an air space can form under a toothfilling and cause discomfort there's no way to equalize this but your dentist can correct it a dry suit holds an air layer around your body that compresses you learn to add air to equalize it when you take thePatti dry suit divert coarse
air expands as you ascend and normally exits your internal ear spaces mask and sinuses without doing anything but expanding air can be a serious issue related to your lungs using scuba your lungs are at normal volume at depthif you were to hold your breath and ascend expanding air would over expand and rupture your lungs much like it burst a balloon filled and sealed a depth for this reason the most important rule in scuba diving isto breathe continuously and never ever hold your breath even small depth changes can cause lung over-expansion injuries if you hold your breath long over expansion can cause severe injuries including paralysis and death medical treatment requires a pressurised recompressionchamber but diving commonly takes place several hours from such chambers but while lung over-expansion injuries are very serious they are also very easy to avoid breathe continuously and never hold your breath while scuba diving this way during ascent
expanding air escapes without issue if you don't have your regulator in your mouth exhale a slow steady bubble stream so you don't hold your breath also never dive with lung congestion which has some risk of trapping air inyour lungs and causing over-expansion injuries it is rare but some body air spaces may have a reverse block this means expanding air can escape diving with a cold or allergy can cause a reverse block but again you shouldn'tdive with a cold gas forming in your digestive system can cause some discomfort if it doesn't pass and an air space under a dental filling may again very rarely cause one if you experience a reverse block stop yourascent descend a meter or a few feet or so and give the trapped air time to work itself out then continue your ascent more slowly
as you've learned as you go deeper and the pressure increases the more gas volume decreases this means that the deeper you are the more air each breath uses from your cylinder so the deeper you are the faster youuse your air because the air is denser with depth it takes more effort to breathe take slow deep breaths while scuba diving pace yourself and avoid getting winded or out of breath if you have a problem stop andmaintain or restore slow deep breathing as a scuba diver one breathe continuously and never ever hold your breath to breathe slowly and deeply 3 don't allow yourself to get winded or out of breath and 4 if faced witha problem stop and maintain and or restore slow deep breathingwhen you put something in water buoyancy pushes the object upward the upward force is equal to the weight of the displaced water whether something floats sinks or does neither depends upon whether it weighs less than more than or
the same as the water it displaces as a diver you primarily use your weight system in BCD buoyancy control device to control your buoyancy as you descend you tend to lose buoyancy you add air to adjust for thechange when you come up you become more buoyant so you vent air to adjust you'll discover that even breathing changes your buoyancy it increases slightly when you inhale and decreases slightly when you exhale by mastering buoyancy control youenable yourself to control your descent and ascent rates to stop at any depth to save energy to stay off the bottom or to float comfortably on the surface

2. Choosing and Caring for Dive Gear

Covers the basics of scuba equipment selection and why fit, comfort, and suitability matter. Also explains how to inspect, rinse, dry, and maintain gear properly.

recreational divers do not dive alone you always dive with a buddy or buddies together you plan your dive help each other gear up safety check each other provide dive time reminders assist with problems and assist with the diveobjective the buddy system is important for practicality because you assist each other and for safety because you can help each other prevent and handle problems it's also important because diving is a social activity you'll find diving is morerewarding and fun simply because you get to share your underwater adventures and experiences with others
without the equipment that adapts you to going underwater diving is impossible so to become a diver you need to learn about scuba gear the basics on how it works and how to choose it like most divers you'll probablyenjoy getting to know your gear you find literally dozens of makes styles and models of scuba gear which is great because it allows you to choose equipment that accommodates your size and preferences how do you know what's bestfor you after you learn the basics about what your gear does and how it works as a beginner your best bet is to have a pro at your pattie resort or dive center help you the gear you investin will last years with proper care but like all technologies scuba continues to advance stay up to date with the latest innovations you'll probably trade up over time not because something older doesn't work anymore but because there's something
newer that you like betterthere are some basics from choosing and caring for dive equipment that apply to virtually all your gear the most important considerations and choice are suitability fit and comfort suitability means it's appropriate for the diving you want to useit for like choosing a full wetsuit for cool water rather than a short wetsuit used in the warm tropics fit is important because a lot of gear doesn't work right if it's the wrong size you get the rightfit by choosing the right size comfort means the gear has the right feeling configuration properly adjusted gear that fits right is usually comfortable but not always if it's not comfortable keep looking after addressing suitability fit and comfort secondaryconsiderations include finding the cost and features that work for you and making sure you have access to service though dive operations almost always service the brands they sell you can usually choose colors and styles that go with the
rest of your kit and remember the accessories that go with each piece these little items add a lot to your enjoyment ask your dive professional for suggestions caring for your gear includes inspecting it for proper operation and forany wear or damage before each use never dive with any equipment that is not in good working order have something that's not right corrected before diving with it after each dive rinse everything in clean fresh water and letit dry out of the Sun before storing it as reasonably possible protect your gear from extended periods and direct sunlight you'll learn that some pieces require additional maintenance and service by a professional and follow any maintenance and servicerequirements in the manufacturer literature

3. Mask, Snorkel, Fins, and Kit Basics

Explains the purpose and selection of the mask, snorkel, and fins. Also introduces how these pieces fit into the larger scuba kit and how the system works together.

you need a mask because your eyes must be an error to focus properly since this creates a narrow space you must equalize your dive mask must enclose your nose as well as your eyes never scuba dive with gogglesbecause you can't equalize them choose a good quality mask made specifically for scuba diving your pati dive shop can help you check the fit after finding some that fit you look for a low profile and a wide visionfield the silicone color is usually either clear or black you often can choose from different frame colors with a new mask you may need to scrub the interior with a cleaner check the manufacturer literature adjust the strap soit fits snugly but comfortably with the strap over the crown of your head asnorkel is standard equipment for recreational diving it lets you breathe look swim and rest with your face in the water or waves without wasting scuba air or if you're low after coming up you usually choose your mask and
snorkel together you attach it with a clip or snorkel keeper give one that fits comfortably when adjusted with the top at the crown of your head many divers like a snorkel that flexes away when you're not using itmost scuba snorkels have self drain valves to help you blow out water and many have guards that reduce water splashing in after choosing the right fit and options you can usually match the color to your mask
sins allow your powerful leg muscles to push you through the water you can choose from adjustable fins which you usually wear with wet suit boots and full foot fins which fit like slippers since you don't use wet suitboots they're usually reserved for warm water you choose fins based on blade and foot pocket size small bladed fins are suited to snorkelling but not scuba be sure to get fins appropriate for scuba diving have a professional helpyou choose the right fit fins have options including the materials they're made from as well as splits and vents to improve performance adjustable fins may feature quick-release buckles or spring heels for convenience and adjusting donning and removing yourPatty professional can help you choose from these options besides inspecting and adjusting them you don't have to do much before diving other than closing the quick-release buckles if yours have them get full foot fins wet to make them
easier to slip on
regular fins aren't much used to someone with limited leg mobility but there are other ways to get around webbed gloves allow such divers to swim with surprising strength deep EVS or diver propulsion vehicles are a fun way forany diver to be mobile underwater but you should be able to use your legs or arms in case it has a problem you're scuba kit is actually for equipment systems integrated into a single package your BCD buoyancy controldevice holds everything together as you learned you use it to control your buoyancy your cylinder supplies high-pressure air to your regulator which provides it to you when you inhale your weight system holds just enough lead to let youdescend it's quick release lets you easily drop your weight in an emergency we'll look at each of the systems more closely next scuba gear is generally interchangeable but because everything integrates you usually select your scuba kit as a
package that puts everything together to meet your preferences

4. BCD, Regulator, Cylinder, and Weights

Describes the main scuba systems in detail, including the BCD, regulator, cylinder, and weight system. Covers their components, features, care, and how they support buoyancy and breathing.

five components make up your BCD it has a bladder you inflate and deflate to control your buoyancy the bladder integrates with a harness or jacket with a band that securely holds your cylinder the low-pressure inflator lets you useit to add air directly from your cylinder by pressing a button you use the other button to deflate the bladder or inflated orally overpressure valves are designed to prevent rupturing from accidentally over filling the bladder some of thesehave quick dump releases you can use to deflate the BCD the weight system pockets hold lead weights but you can release them quickly you have options regarding BCD features beyond getting the right size and fit some have moreair capacity than others pockets and d-rings for storing and clipping accessories come in handy many divers like shoulder click releases they make getting out of your kit easier BC these are among the most stylish pieces of gear and
you can choose from several looks adjust your BCD so it's snug but not too tight while wearing your exposure suit inflate it to be sure it doesn't restrict breathing after it's said attach an emergency whistle to the lowpressure inflator and mount the hose retainers that hold some of the regulator components when caring for your BCD rinse the inside of the bladder as well as the outside drain it and after drying store it with a bitof air inside
your regulator has five components the first stage attaches to the cylinder valve and supplies air to the other components you breathe from the second stage it delivers air only when you inhale or when you press the manual purgebutton your alternate air source is a second stage on a longer hose that you use to share in an emergency you'll learn about other types of alternate air source 'as to the low-pressure inflator host supplies air to yourBCD inflator and your SPG submersible pressure gauge tells you how much air you have an SPG may be separate or part of your dive computer and it may be on a hose or use a transmitter that sends airsupply information to your dive computer ease of breathing is the most important consideration when you choose a regulator modern regulators meet the requirements for recreational diving but the higher-end models usually breathe the easiest you'll choose between the yoke
system or the din system many divers choose din with yoke system adaptersjust many higher-end regulators to keep the breathing optimal some have dived pre-dive switches that avoid accidental air release when it's not in your mouth besides the popular second stage on a longer hose as your alternate air source youmay opt for an alternate inflator regulator which combines a second stage with your BCD inflator some divers carry independent pony bottles which would allow them to handle an air supply problem without buddy assistance preparing your regulator requires attachingthese components to the appropriate ports which you should leave to a scuba professional regulators are robust and reliable but have a couple of maintenance considerations when rinsing keep the first stage dust cap in place or leave it attachedto a cylinder to water doesn't enter the air inlet don't press the purge button when rinsing the second stage with fresh water because doing so could let water flow backward into it regulators require professional overhauls every one to
two years have your dive Center do this as required by the manufacturer
scuba regulators are surprisingly simple air flows from the first stage to the second stage which you can think of as a cup with a mouthpiece a flexible diaphragm and one-way valve when you inhale water pressure causes the diaphragmto flex inward depressing the air valve lever this releases air that you breathe in when you exhale the diaphragm relaxes the lever Rises and the valve closes one-way valves Bend your exhalation into the water where it rises asbubbles although there are variations it is this simple design that makes scuba diving possible your scuba cylinder sometimes called a tank holds high pressure breathing air made of steel or aluminum alloy it has a chrome-plated valve that turnsopen and closed to enable or disable air flow to the regulator you can choose from different sizes and you match your regulator with respect to a yoke valve or din valve some din valves accept an insert so they
can take yolk regulators to all cylinders have markings stamped into the metal and labels stuck onto them with the working pressure and the dates of pressure tests and inspections your dive centre checks these when you have your cylinderfilled you may see a cylinder with this marking which means it's used with enriched air nitrox you must be certified as an enriched air diver to use these cylinders you'll learn more about enriched air a bit later followthese handling precautions don't leave a cylinder standing unattended especially if your kids set up lay it down BCD up so it doesn't fall block and restrain cylinders in a boat or car so they can't roll or slide onboats keep cylinders in their racks so they can't fall and injure someone or damaged equipment scuba cylinders require pressure testing every 2 to 5 years and visual inspection annually have your local dive centre do these for you open
and close the valve gently and never completely drain it lay your cylinder down before and after diving but for storage keep it standing some place it won't get knocked over out of excessive heat scuba air must be speciallyfiltered and filled with special breathing air compressors so have your cylinder filled only at a professional dive resort or dive Center as mentioned before your weight systems most important feature is a quick release that lets you drop enoughweight so you float reliably in an emergency most BCD weight systems do this with two releasable pockets it may also have small non-releasable weights you use for trim adjustment that is your balance in the water your BCD andweight placement determine trim and your instructor will show you how to adjust it for a level horizontal position in the water BCD integrated weight systems are the most popular but some divers use separate weight belts your instructor may
also have you use small accessory weights to help adjust your trim these should be only a fraction of the weight you wear so they don't need to quick-release

5. Preparing for Confined Water Dives

Walks through assembling gear, checking equipment, and putting on scuba kit safely. Also explains the order of donning equipment and how to get ready for entering the water.

let's go over the skills you'll be learning as a diver you'll practice many or all of these during your first confined water dive the previews you see here show you the basics that apply to most equipment and diversbut there are many ways to accomplish most skills so your instructor may show you a different method as appropriate for you and your gear the first skill is setting up your kit start by inspecting everything for wear ordamage if you have a new BCD wet it or at least the cylinder band this helps it stay adjusted slide the BCD onto the cylinder with the valve opening facing the BCD to about this height you can adjustit later to suit your preference tighten and then lock the cylinder band these very so get your instructor to help if necessary lift everything by the BCD and make sure the cylinder doesn't slip or move if it does
tighten the band remove the first stage dust cap and the cylinder valve cap if it has one make sure there's an o-ring and that it's not damaged with the yoke system it's part of the valve opening with dincheck here on the regulator you can't dive without this o-ring if it's missing or appears damaged your instructor will show you how to replace it with your BCD facing away from you fit the first stage to the valveso that the primary second stage the one you breathe from goes to the right and the low-pressure inflator hose to the BCD goes to the left secure the first stage just finger tight cylinder pressure will keep everything secureafter you open the valve connect the low pressure hose to the BCD inflator like this holding the SPG away from you slowly open the cylinder valve all the way until it stops check to be sure you have a
full cylinder or at least enough air for the press the purge button like this airflow should stop when you let go exhale into the mouthpiece exhalation should be easy then take a few breaths breathing should be easy andsmooth if your regulator free flows or continues to release air after you stop breathing or seems to have some other problem notify your instructor next test your BCD inflator like this secure your SPG and alternate air source soneither will protrude or dangle underwater your SPG usually comes under your left arm and an alternate second stage under your right attach your alternate with a quick-release so that it's in this triangle area when you're wearing your gearthis keeps it out of the way yet visible and quickly accessible if it's needed check that you've reconnected shoulder release buckles and loosen the waist strap if you won't be diving for a while say an hour or more
close the valve and depressurize the regulator by pressing the purge button this saves your air if there's a leak you didn't notice depressurizing also reduces the chance of you accidentally getting water in it with the valve closed loosenany straps you can tighten after you put your rig on so it's easier to get in to secure your kit so it can't fall or lay it down on
your first confined water dive you may give up in shallow water but often you kit up seat it out of the water like this or standing like this let's go over the steps before getting into your kit orexposure suit get everything else ready default your mask then adjust it your fins and snorkel as necessary your skubick it should be fully assembled and ready to go like you just learned to avoid overheating when it's hot puton your exposure suit last just before getting into your scuba kit wetsuits fit snugly and take some effort the order depends on the type with this common style start with the bottoms followed by the boots hood if you'rewearing one and jacket your instructor will show you the right order for your suit dry suits are single pieces and differ in how you put them on if you're using one in this course your instructor will show you
how to get into yours you can put on wrist mounted instruments now though some divers wait until they're in their scuba kits if you're using a weight belt that goes on next wear it so it has the standardizedright hand release if your BCD has a crotch strap which is not common in recreational diving your weight belt goes on after you have your scuba kit on this is necessary so the crotch strap doesn't trap the beltand make it hard to drop in an emergency if possible it's best to get into your kit seated but sometimes buddies have to hold their rigs for each other dive gear is moderately heavy so use proper lifting wheneveryou move it this means bend at the knees and lift by standing keep your back straight with its normal curve like this raise your upper chest and stick out your buttocks slightly to keep your back in the right
position exhale as you lift never bend your back to lift scuba gear or anything else that's heavy for that matter if you have to hold your buddy's kit support it with your strong arm and hand on the cylinderbottom and the other balancing it like this the stronger diver usually kits up first because the diver will be wearing and holding gear at the same time if your physical characteristic make lifting standing and or walking and scubaequipment unreasonable and/or unsafe don't do it ask for help as necessary and there are plenty of alternative methods for getting into your kit while seated or with a buddy holding your kit flip into your BCD and tighten thestraps with the weight off your shoulders check for trapped hoses then secure all the releases and buckles check the cylinder height by tilting your head if it touches the first-stage readjust the cylinder lower when your buddy your buddies
are ready you perform a pre dive safety check and confirm gear operation location and connection for each other you'll learn the details to this in section 2 put your mask on by placing it against your face for agood seal and then pulling the strap back develop good habits by always having your mask on in the water even at the surface this protects your eyes from unexpected splashes and waves and lets you see underwater to checkyour buddies gear for instance if you have to deal with a sudden problem it also keeps the defog from washing out put on your gloves then your fins go on last just before entering the water buddies help studyeach other donning fins one at a time don't forget to wet full foot fin so you can put them on easier avoid walking with fins on as much as possible put them on as close to the water as
you can if you must walk while wearing them be cautious and walk backwards so you don't trip over the blade sometimes you put your fins on after you into the water like when training in a pool at thispoint you're ready to get in using one of several possible entry techniques you'll learn during the course

6. First Breaths and Underwater Signals

Explains buoyancy control at the surface and the excitement of breathing underwater for the first time. Introduces common hand signals and teaches how to clear a flooded regulator and mask.

you constantly use your BCD to control your buoyancy before entering partially inflated so you will float say about 1/3 inflate using show at birth like this you can also inflate it orally which you'll practice to deflate your BCDin the water breathe from your regulator and raise and depress the exhaust button like this air will vent from the BCD and you'll descend during the course you practice using your BCD until you can stay neutrally buoyant likebeing weightless whenever you want release an ADD air and small amounts so you avoid accidental rapid descent and a sense for the first dive you'll use your BCD primarily at the surface make a habit of floating positively buoyantwith your mask on breathing from your snorkel or regulator inflate your BCD before entering the water and inflated first thing when you come up from a dive if you have a problem at the surface immediately make yourself buoyant
inflate your BCD later you'll also learn to drop your weight so your buoyantwhen everything's set your instructor will have you go underwater using scuba your first breaths underwater are exhilarating breathing underwater is one of the unique experiences that makes diving special enjoy the moment breathe slowly deeply and don't hold yourbreath chances are you'll never forget your first breath underwater
you can't talk using standard recreational scuba gear so you and your buddies use hand signals here are some widely accepted signals but you may learn some regional ones as well as makes them up with your buddies for thecircumstances okay or okay stop go up or end the dive something's wrong which way
boat
ears not clearing come here watch me get with your buddy hold handsyou lead I'll followdown or descend low on air out of air share air slow down or calm down breathe
how much air do you have danger or hazard turn the dice or head back I'm cold at the surface you use large signals that are more visible from a boat or shore this means okay or okay if youcan only use one hand it's like this this means distress or help me your instructor may show you additional signals that apply to training you find that you understand signals in context with what's happening see if you canfigure out what these divers are saying
you should have recognized that the trailing diver was having trouble keeping up he signaled stop and something is wrong the buddy replied to stop breathe and slow down that is take it easy and to catch his breath thediver signaled let me rest a little a little is not an official signal but you can tell what he meant this is normal diver communication
when your regulator leaves your mouth it fills with water so you'll learn two ways to clear it and resume breathing the first is the exhalation method if you have a breath in your lungs replace the mouthpiece and blowinto it this pushes the water out your head needs to be relatively upright so the exhaust valves are in the lowest position and of course you must exhale before you inhale use the purge method if you don't havemuch air to exhale replace the second stage stick your tongue against the mouthpiece to block it and push the purge button for a moment like this this pushes out the water blocking the mouthpiece helps keep water from sprayingin and making you coughed with either method because you should never hold your breath remember to blow a steady stream of small bubbles when the regulator is out of your mouth it helps to make a continuous ah sound
so you keep your airway open after clearing and he“ll your first breath gently and cautiously in case there's residual water if you release your second stage depending upon your position it may drop in front of you or itmay end up behind your shoulder out of sight to recover with the arm sweep method in a relatively upright position like this lower your right shoulder extend your right arm backward along your cylinder then sweep outward like thisto locate the hose follow the hose to the second stage replace and clear with the reach method reach back to the first stage find where the hose attaches and follow it out like this it sometimes helps to liftthe cylinder up and to the right with your left hand with either method blow bubbles when the regulator is not in your mouth when swimming a dropped regulator usually hangs in front of you where it's easy to find
but if you ever have difficulty relocating your second stage don't waste time trying to find it just switch to your alternate air source and then get your body to help it's normal for some water to trickle into yourmask but it's easy to get rid of it hold the top of your mask then while exhaling slowly and steadily through your nose look upward your breath forces the water out the bottom edge of your mask start excellingbefore you look up so you don't get a little water in your nose some masks have a purge valve for clearing if yours does hold the mask firmly against your face and look down while exhaling the water goesout the valve by the way if you normally wear contact lenses but can see well enough without them you may want to have them out during your training dives but if you need them tell your instructor and keep
your eyes closed so you don't lose them when learning to clear your mask

7. Air Monitoring and Emergency Sharing

Focuses on monitoring air supply and recognizing reserve pressure. Also covers equalization reminders, out-of-air response, buddy air sharing, safe ascent, and dropping weights in an emergency.

use your SPG to manage your air supply at all times with good air monitoring and management habits you avoid running out of air so they're obviously important habits to develop with a full cylinder your SPG reads close tothe cylinder working pressure pay attention to how fast you use your air you'll notice you use it faster as you exert more and when you dive deeper with experience you get a feel for how much air you usealso with experience you'll use less air as you relax control your buoyancy better and move more efficiently note the caution zone which indicates when you have fifty bar or 500 psi left if your SPG is part of yourcomputer the display may blink or have some other alert this is your reserved pressure you plan an execute dive so you have at least this remaining after you're out of the water during training alert your instructor when you're
getting close to fifty bar or 500 psi your instructor may ask for alerts at other pressures during the course you'll learn to turn the dive that is head back to the boat or Shore based on your remaining airsupply
you learned about Equalization earlier recall that you need to equalize as you descend to avoid squeezes equalize gently and often every meter or few feet equalize your mask by blowing into it from your nose descend slowly and bepatient do not use long forceful Equalization which can damage your ears and cause hearing loss if you have difficulty equalizing stop your descent signal your buddy and your instructor ascend a bit and try again after equalizing descend moreslowly and equalize more often never continue descending if you can't equalizethe most popular dive kick is the flutter kick to do this without wasted effort starting neutrally buoyant horizontal and level kick from the hip with your arms at your side or against your body like this your knee doesn'tBend much and it's a slow long kick stay well above the bottom so you don't damage fragile organisms you may learn other kicks depending upon your preferences or to meet specific needs this is the frog kick many experienced
divers use it most of the time instead of the flutter kick
with proper air management an air supply emergency should be highly unlikely but as a diver you'll know how to manage the problem should it occur were you to find yourself out of air if possible you would use analternate air source most commonly provided by your buddy signal out of air and share air your buddy responds by providing her alternate second stage though you can secure it yourself if she doesn't if your buddy uses an alternateinflator regulator she switches to it and provides you the primary from her mouth either way secure the alternate clear it and begin breathing grip each other's right forearms like this this keeps you together and leaves your left handfree to deflate your BCD and control your buoyancy as you ascend take just a moment to get settled if you need to then ascend at a safe rate to the surface
you'll learn to ascend at a safe rate with your buddy signal up to your buddy start your ascend by swimming upward you should not need to put air in your BCD as you come up look up reach upand come up slowly like this staying with your buddy and checking overhead regularly breathe normally and don't hold your breath ascend slowly your computer may warn you if you go too fast remember what you learned about expanding airas you come up the air in your BCD expands so you have to vent some to keep from becoming too buoyant release small regular bursts like this during your first confined water dive your instructor may do this foryou when you reach the surface keep breathing from your regulator while you inflate your BCD once you're floating comfortably you can switch to your snorkel again make a habit of keeping your mask on and either your snorkel or
regulator in your mouth while at the surface youif you need to float in an emergency one option is to drop your weights especially if you don't have air in your cylinder or have a BCD problem never hesitate to drop your weights at the surface remember youdon't have to drop all your weight just enough to float dropping your weight underwater risks an uncontrolled rapid ascent so you only do it if you're unsure you could reach the surface any other way when you practice withyour instructor first make sure no one's below you breathe from your regulator and simulate a BCD problem by deflating it you may have to kick to stay up then quick release your weight pull it well clear and dropit you'll float right up

8. Surfacing and Post-Dive Procedures

Describes oral inflation at the surface, safe exit techniques, and how to remove gear after the dive. Ends with disassembly, securing equipment, and rinsing everything for care.

after surfacing in an out of air emergency or if you disconnected a runaway inflator your BCD low pressure inflator won't work so you use oral inflation at the surface hold the BCD inflate or deflate er with your lefthand inflate by blowing into it while depressing the same button you usually use to deflate remove your mouthpiece kick upward taking a breath and blow about half to two-thirds of it into your BCD as you settle back intothe water like this repeat this until you're positively buoyant be sure to release the deflator button when you're not blowing in otherwise the BCD will deflate of course how you exit the water depends upon the environment and yourphysical needs you'll probably learn and practice several techniques the following guidelines apply to most exits 1 establish positive buoyancy before switching to your snorkel to remove your fins before exiting if appropriate for the technique this helps you avoid
walking with fins on 3 keep your mask on and breathe from your snorkel or regulator until you're on the boat or in calm water shallow enough in which to stand after exiting if you didn't take your fins offbefore exiting sit as soon as you can or take them off with a buddy it's usually easiest to get out of your gear seated though buddy sometimes help each other while standing remember to use proper lift techniques andon a boat secure your equipment so it can't fall when you're ready to take your gear apart start by closing the cylinder valve depressurize the regulator by pressing the purge then disconnect the low-pressure hose from the BCD inflatorremove the first stage dry the dust cap and replace it take weights from the weight system and secure all the BCD buckles and stress release the cylinder band and slide off the BCD risa cure the cylinder or onshore
lay it down rinse everything like you've already learned
Seek backward 5s ←
Longer seek (10s) Shift ←
Play Space Seek forward 5s →
Longer seek (10s) Shift →
0:00 Auto-scroll A Copy link at current time S

PADI Open Water Course English Chapter1 V.2