1. Introduction and Reading Gauge on Ravelry
The host introduces the topic of swatching and gauge, then walks through a Ravelry pattern page (Flax Worsted) to show how to read yarn weight, gauge, texture, and needle requirements.
I see a lot of people make projects and they spend so much time and so much money investing in them and at the end if they really don't like what they've made it's a shame hi my name isMark and welcome to the channel today I'm sitting down to talk about swatching get engage and how to make sure your next garment fits you perfectly if you're interested stick around and let's get into it
by now I've learned that my audience here on YouTube consists of a huge range of Crafters I have some people that watch me who know just about everything there is to know you've made every type of project andso you very generously pour out your advice your support when I need guidance and when I'm struggling to figure something out in one of my projects I also have people who watch that might be starting from scratch theymight stumble upon one of these videos and that could be the inspiration to pick up a crochet hook or knitting needles so in videos like this I hope that the information I share covers that range I hope there'ssomething for everyone so we'll skip around something might not make sense and fly over your head something else might seem really Elementary to you but if you're interested in spending a bit of time with me I'll bounce back
and forth uh throughout that range of advice if you're someone who likes to make projects where you follow an existing pattern you'll notice that there's always a note about gauge so let's start by looking at some of thoseexamples on rivalry I've got rivalry pulled up on my computer and if you're not already familiar with it rivalry is is an enormous database of patterns patterns for knits crocheters um Weavers a lot of different handcrafts and italso has a social element to it you can connect with other Crafters post about your projects give notes give feedback on the process so for a lot of people it's an extremely valuable resource for their handcrafts so I'mgoing to start by pulling up a sweater called flax so I'm searching under patterns and it's going to be one of the first that comes up here and we're going to look at flax worsted this is a pattern
from tinan nits tinan nits has a wonderful collection of beginner friendly patterns and I think all of them or most all of them are free so if you are making your first sweater your first hat um things likethat take a look at these patterns they offer a ton of pattern support so if you get started and then you hit a road bump they have a lot of video resources a good team of people people toactually get in contact with you to help you get back on track so this is a free pattern so we're not going to look inside the pattern itself even if a pattern is free you should still go downloadit from the right place you should go to that designer's website you should go through rivalry where you can click the free button um but we're going to look at the overview page this is all public we don't
have to pay we don't have to download anything to get here so anyone can see this so on this overview of the pattern you'll see where it's published The Craft This is a knitted sweater and then suggested yarnbut I'm going to scroll down to the yarn weight this is one of the first things we'll look at when determining gauge for a project so here our gauge is excuse me our weight is worsted so that narrowsus down to uh four size four yarn a worsted heavier than DK lighter than bulky and then we have the gauge so typically a designer will take the time to give you the gauge that they achieved before makingwhatever the project is so they've said here 18 stitches and 22 rows equals 4 in in stock AET in the round on larger needles so that's a lot of information let's break it down the first thing we know
2. Casting On and Swatching in the Round
Demonstrates casting on extra stitches for an accurate swatch and shows the trick of mock-knitting in the round on flat needles, including a yarn-saving method for carrying the working yarn.
is the yarn weight we need to be working with worsted weight yarn for this so I have some worsted weight yarn this is from wool stock of Blue Sky fibers um worsted weight non-s super wash wool that Ihave left over from another project let's say I know I want to make the sweater out of wool stock then I can jump in to do my gauge Swatch with the same fiber the next information is how manystitches we're aiming for they list 18 stitches and 22 rows if we do that we should get to 4 in by 4 in then it tells us the texture we need to knit which is stock AET in theround and then it says on larger needles so let's go back to stock AET different sweaters have different textures different projects whatever you're making might have different elements to it it might all be stocking net it might all
be garter it could be something with color work or a textured knit or crochet so whatever we do to swatch for a project should match the body of the project the bulk of the actual fabric will'll be makinglater I've pulled a couple of things off my shelves just to show you different textures that we could be aiming for in projects first I have my field sweater you'll see that part of this is stock a netstitch where we just see the vs of the knit but up top we have a very textured portion of knitting so for this type of sweater we might be instructed to test both Stitch combinations to get our gaugenext up I have a weekend tender from Andrea Maui the body of this sweater is done in Reverse stockinet meaning it's just the opposite side of stockinet Stitch so for the gauge of this sweater getting our Swatch we
should work in stockinet or reverse stocket and make sure to measure that texture one more example I'll show is color work here I have a stockinet texture all of these stitches are knit stitches however I'm using multi mlecolors uh holding two at a time sometimes three at a time as I work and that's going to change the gauge that's going to adjust my tension and adjust how the fabric stretches and is created so fortunately thispattern tells us exactly what kind of texture we need for our gauge Swatch so they say stock AET stitch in the round we'll talk about in the round versus flat in just a couple of minutes and then thelast bit of information is that we need to do the Swatch on larger needles so then we look at the needle sizes used in the pattern there are two typically in sweaters you'll have one size for ribbing and
another size for the body of the Garment usually the smaller needle size is for the ribbing just so it pulls in a bit and holds its shape um things like ribbing at necklines wrists where you don't want thefabric to flare out but you maybe want it to taper in slightly my 5mm needles are current currently in another Swatch this is for a Seaglass sweater so I'm going to slide that work off of the needles usingone of my favorite tools which is Barber cord or Stitch saver it's just a silicone tube with holes or a hole running through it and all you do is affix one end of this tube to your needle tipand then you're able to pretty easily slide your stitches off the needle and onto the Stitch saver so I'm just going to scoot these down and within just a few seconds they're safely on that Stitch saver and I
don't have to put them on scrap yarn or bind off the project later when I come back to this Swatch I'll do the reverse where I'll just reconnect the Stitch saver to the end of my needle tip andI'll slide the stitches back on now that my needles are free I'll show you everything we need for our Swatch besides the needles in the recommended size I've got my yarn match the weight of yarn called for inthe pattern I've got a tape measure and I've got a pair of scissors I have a couple of other methods for measuring that I'll show you once we've made the gauge Swatch any of them work there are lotsof tools and gadgets out there but as long as you have a ruler or a tape measure you'll be okay as I cast on for this Swatch let's talk about how many stitches we need to cast on and
why that's important the pattern tells us that 18 stitches should get us to 4 in so you might think we cast on 18 stitches you could do that but there are a couple of factors that will affect howthat measures out one the edge of your work typically rolls if you don't have anything anchoring the edge of your Stitch something's going to happen to it it's going to curl under it might start to roll up it'snot going to sit at its full um stature it's not going to sit at its full height or width so we want to cast on more stitches than we need and a lot of people go with creating a5 in by 5 in square when they really need to measure 4 in and there are other people that go with 6 in by 6 in typically I do somewhere close to five um I like to get into
my projects I don't want to wait too long I don't want to hesitate before starting but it is important that I know that the yarn I'm choosing the needle size I'm choosing and the fabric I'm creating will workout to be the size sweater and the feel of the sweater that I want so in this case instead of casting on 18 stitches I might add um eight or 10 additional stitches to that so I get aboutan inch on either side of my 4 in measure all right I've ended up with 26 stitches on my needles this should give me a little wiggle room on each side of the 18 so that I have acentral portion of the Swatch that I can measure now our texture that we need to ni is stock AET so that's knitting the right side of the work and pearling the wrong side of the work however our instructions
show that we need to do this Swatch in the round now if you're familiar with working projects in the round typically that's something like a sock a hat the body of a sweater where your stitches connect all theway around a circular needle or double pointed needles so how are we going to make this in the round I've talked about this in couple of my recent videos so if you've already seen it bear with me youcan skip ahead but if you're new to my channel and this video is a first for you I'll show you how we can mock working in the round without actually having enough stitches to connect the work in theround so I'm finishing my first row and then I'll show you how we get back to the start of the work so that we're working the right side again if this project were to be worked flat where we're
turning it at each row then I would just flip it over and I would Pearl across this row to continue in my stockinet texture but because the pattern specifically tells us that we need to Swatch in the roundwe'll do that and the reason is for a lot of people pearls and knits are not the exact same measurement so sometimes it's drastic enough that you can see it in the fabric other times it may not bebig enough to see with a naked eye but it would affect something like hundreds of stitches in the body of a sweater so to work the right side again we're going to first slide our work from one endof our circular needles to the other now I'm still looking at what is the right side and I'm ready to knit from this end however my yarn is not at that end what a lot of people will do
is carry a length of yarn across pinch it to Anchor and then start knitting with it then I'm still working the right side and I just have an extra uh length of yarn running across the back of myswatch which is fine something that one of my viewers Richard pointed out to me after talking about swatching this way a month or two ago is that you can do something else here to save your fiber so thatyou don't have a whole length wasted we can pull a length of yarn across much larger than we need and then work with the tail end of it so let me show that for stocket texture I might needsomething like four times the width of the project and here's where we have to do a little bit of estimating and it might not work so if you're going to be frustrated by that you can always pull the
length across and work from the working tail of the yarn let's try this way together so I'm pulling across once
twice three times and four times so now I'm going to keep that PIN inched and I'm going to bring it to the side to Anchor it we now have a huge Loop of yarn and this yarn isn't goingto be left running across the back of the Swatch instead we're going to work with this yarn so instead of working with the tail the live end of the yarn I'm going to flip this over pinch it againand I'm going to work with this the extra length we've pulled so let me get my needle and I'll work another knit row because we're still looking at the right side the correct side of the Swatch once Ido my first few stitches that end gets anchored and I can let go and now I'll keep working with this extra length we've created it's okay if we have more than we need we just don't want to run
out of yarn if we run out I'd have to pick back these stitches which is not fun and if you don't like picking back or tinking back your work then this might not be the best method until youfigured out how much extra length you need so let's see if four times was close to being correct I'm in my last couple of stitches and then we'll see what this looks like I think I estimated pretty wellso that large length we had I'm now left with just maybe an inch and a half Loop and then we have nothing behind the swatch so to work an additional right side row we'll slide our work back tothe other end of the needles and this time our working yarn is in the right place which is kind of the fun magic of this you only have to estimate the length every other row so let's do a
couple more rows here together and then I will speed up off camera and finish this Swatch okay we've made it to the end of this row so now we'll do the same thing where we slide our work tothe other end of the needles and this time just as in our previous iteration the yarn is not on the correct side there's no yarn here for me to pull so I need to find our tail and I'lldo the same estimation of about four times the width of my swatch so I pull it across once pull back for two three four I pinch and flip that over so I'm no longer working with the live yarnbut working with the loop I've created
3. Why Swatching Matters for Projects
Explains the benefits of swatching: checking measurements, evaluating fabric density and drape, practicing new techniques, and testing color combinations before committing to a full garment.
and I'll knit another row looking at the right side of the work as I continue this Swatch let's talk about all of the things that swatching can achieve the first that we've already mentioned is figuring out the measurementfiguring out how our stitches will measure and whether or not they will line up with the measurements the designer got as they were working with whatever the design is and once we have those measurements there are several thingswe can do before proceeding um we don't necessarily have to to get their exact gauge to be successful with our project but it's a really good starting point the next thing after measurements is to determine whether or notwe like the fabric we're creating once we have the Swatch or a bit of knitting or a bit of crocheting done we'll really be able to tell what we think of the fabric if we think it's too dense
if it's too loose if there's not enough drape if there's too much drape and then we can make adjustments uh a lot of people jump into projects immediately and if you don't take just a few minutes you knowmaybe an hour of your time to check these things you might end up with a garment or finished object that you really don't care for uh it might just be two different from the pictures you saw on thepattern it might be different from another version you've seen in real life or another version you've made yourself uh if you're using a different yarn and a different needle size or hook size or your tension has shifted itcould turn out being completely different so to save ourselves some of that surprise it's nice to work a bit of a gauge Swatch another benefit that I really appreciate from swatching is that it gives me a heads up
or a test drive to work with the fiber work with the needle size and work with whatever the Stitch combination is so if it's stock AET Stitch that's fine it's pretty familiar because I knit all the time ifit's something like a cable pattern or a color workor Motif it's nice because I get the chance to practice that on a Swatch maybe I get better at that technique before I actually jump into the project and Ithink for me that saves seeing the learning process over the duration of my work if I'm doing something new unfamiliar maybe a little uncomfortable at the start of the project my work probably won't look its best but thenafter I've done that whatever technique is for hours and hours and hours later in the project it's going to look much smoother so doing a Swatch giving yourself an hour or two of time to practice whatever the Stitch
is might even out your work it might sort of up the level of finishing that you have with whatever you're making another nice reason to Swatch could be putting colors together if you're planning to do something like Stripesif you're doing a color work project if you're doing something like a Seaglass project this can be a really great opportunity to put colors together that you're not sure about maybe they are stash colors you have maybe you'rejust trying out a new combination and you're not sure you'll like the contrast or uh just the balance of color and whether or not you'd want to wear it yourself it can be great to see that come tolife through swatching so on my desk right now I have five or six swatches for a Seaglass sweater because I'm putting together lots of colors and and I have my doubts I want to make sure it's something that
I'm really going to like and I just want to spend a little more time with all of these colors before diving into the project and maybe regretting it and wanting to turn back now all of that to sayit's obviously not the end of the world if you end up with something that you're not the biggest fan of uh but you don't want to dislike it I see a lot of people make projects and they spendso much time and so much money investing in them and the end if they really don't like what they've made it's a shame because it sits there unworn maybe it gets given to someone else and maybe it's nottheir taste either or it's not the right fit for them either um and so sometimes people are left where they'll pull back an entire project or scrap it um which is fine it's fine to change your mind and
pull back but I don't like having to do that I like being able to jump into a project having considered yarn done my swatching and then be happy or pleasantly surprised at the end of the process with whatever
4. Blocking and Measuring the Swatch
Covers why and how to block a swatch to match the finished garment's treatment, then demonstrates measuring stitch gauge with various tools and interpreting results that show the gauge is off.
I've made let's take a look at our Swatch so far everything looks fairly even so that's a good sign however I can tell holding my hand behind it that this is a bit transparent you can see the gapsbetween stitches and that could be happening for a couple of different reasons one the needle side size might be a little bit too large for this yarn or alternatively the yarn might be a little too light lightweight forthis needle size um the other thing is that depending on the fiber you're using it might Bloom it might shift quite a bit when it's blocked and that leads me to a totally different discussion of blocking I havesome videos on it if you're someone who blocks everything you make you either give it a bath to soak it let it dry um or you steam it you do something something to set it using water and then
the drying process then you should block your Swatch if you're blocking whatever you're making you should block the Swatch because you want to treat the Swatch in the exact same way you'll treat the bigger project if you're someonewho has never blocked anything and you have no interest in doing that then you should take the measurements from an unblocked Swatch so the biggest takeaway is that whatever you plan to do to the finished object or finishedgarment you should do to the Swatch so the first thing we did is we're working this Swatch in the round because we'll work the sweater in the round the next thing to consider is whether or not we willblock the finished project which I would because I love to block things I think it helps the fiber settle it helps the fiber Bloom it makes my stitches look more even if I'm doing color work or cables it
really shifts the work after the fact so of course that depends on what fiber you're using this is a non-s Superwash wool so blocking it is going to have some magic work if I were using cotton it wouldn'tdo as much if I were using acrylic it might do even less I think that it doesn't hurt to block whatever you've made I think giving it a bath um cleaning it off depending on what it's been exposedto during the making process if you have a wool wash or a light soap that you like to use with the blocking process then it imparts a nice scent to it or if you use an unscented product itat least gives it a good cleaning so I think blocking is beneficial to anything you've made but it will do the most for wool so if you're using a non-s Superwash wool if you're using Superwash Marino if you're
using Blends it could have a lot of really magical incredible effects after effects to whatever you've made part of this translucent effect might disappear after we blocked this Swatch and if I plan to really soak my sweater atthe end I should take the time to soak my swatch sometimes if I'm in a rush and I just want to set it in a faster way I'll steam it so there are different ways you can block youcan look all that up there are some great videos here on YouTube but whatever you plan to do to the finished object you should do to your Swatch at this point I've reached an approximate Square it's maybe alittle shorter than it needs to be but um we're most interested in getting the Stitch gauge we'll also measure the row gauge but Stitch gauge is going to be most important to us so I think this is a
good stopping point I'm going to take my Stitch saver my barber cord pop it onto the end of my needle and then slide my swatch over to it this is for a couple of reasons um one it's goingto allow the Swatch to lay as flat as it needs to two it allows us to go block this I could take this whole thing and place it in water submerged I could steam it and I'm not goingto damage my needles whether they're bamboo stainless steel aluminum I don't want to be soaking those so I've slid it onto this I could have bound off but I want to keep this connected to the working yarn justto show for those who are interested in pulling their Swatch back and reusing the yarn in the project so we haven't cut anything none of our ends are cut so we could pull this whole thing back if we
need to and reuse it another reason I'm not Binding off is because if we need to continue swatching if our measurements are way off and we want to change the texture change the fabric we might want to trythis on a smaller needle or a larger needle and in that case I would love to be able to just slide things back on put some sort of textured row or two maybe some garter stitch for a fewrows and then continue my swatch with with the new needle size that way if I take this to a friend to get an opinion if I take it to my local yarn shop if I'm looking at it inthe future I can see my first attempt on the recommended needle size then further up in the Swatch I can see another section where I've played with adjusting something so let's first take measurements before we've blocked and I'll
write all of those down and then we'll block it and take measurements afterwards we want as much information as possible and we want to make sure that we're recording that information somewhere so that we can reference it laterbefore we cast on or even during the project now I'll bring in my various measuring tools as I mentioned before you can measure with a regular ruler with a tape measure and then there are specialty tools that differentknitting companies make so this is a magnifying glass gauge ruler the larger portions here are inch measures and I can lay it over the work let me hold it up to the camera so you can see a bitbetter I can take the magnifying ruler lay it over the work until it lines up with stitches and then I can count my stitches through the magnifying panel for some people this is a really helpful tool one thing
I like about it is that I can place it firmly on top of my work and I know the work is not sliding around or moving anywhere when I'm working with a tape measure if I'm doing it ina precarious setting the table might get bumped the work might slide around so it is nice to be able to put a lot of pressure down on the Swatch or on whatever I'm making to then be able tocount the stitches through the magnifying glass another tool that's pretty common is to have some sort of ruler with a window um I don't own a true Square gauge ruler I'd like one of those I think they're niceto be able to lay the exact Square 4 in x 4 in over your work and then imagine we have the square here then we just count what we can see from inside it this is similar where we
take the open window and line it up at the edge of a column of stitches making sure that the bottom the row is also lined up and then we can count however this is only a 2in window whereI really prefer to measure across 4 in or more uh the more inches of stitches we're measuring the better actual measurement we're getting if we were to just measure one inch it might have been an inch where youhad a larger Stitch something happened with your tension you were distracted you were angry you were excited and your stitches weren't regular they didn't match your regular tension so it's nicest to measure in multiple places and across thelargest possible Swatch of fabric the next thing to know is what we're measuring this is a stock AET Swatch and so we see all of these V's these knit stitches throughout so that's what we're counting we want to
line up our ruler along one side of a column of v's and have it run until we hit hopefully a full Stitch but if it's a partial Stitch we'll take that into account and then we're counting the v'sacross so just to trace one out here's a v it's kind of a large Stitch so that might have been a place where my tension was just a bit off and that's okay I mean the whole sweater thewhole project I'm making is going to look human because I'm making it by hand but that's why we're not just measuring one inch we're measuring across a larger stretch so I would take each V across and count themso let's line that up with a ruler I'll use my Straight ruler for this and we'll write down the measurements that we get so I'm getting 17 stitches in that first count so I'll write that down now I'm
going to move to another part of the Swatch because my tension might be a bit different there it's best to keep these measurements somewhere in the central portion of your Swatch you don't want to be right on thefar Edge where your stitches can get looser or manipulated and we also don't want to be right at the bottom or the top so I'm trying to find places that are internal to the Swatch 17 again so Icould keep doing this over and over until I'm only getting 17 or if I think I know what I'm doing and I'm really lining it up I could trust that we're getting 17 stitches I'll show it one moretime this time with a tape measure because it's bright and you'll probably be able to see it better against the Swatch and we're going to go to another place on the Swatch I got 17 again so my unblocked
Swatch is clearly 17 stitches equals 4 in now that is not the gauge we want we want 18 stitches to equal 4 in so what does this mean we have one stitch Less in our measurement which means mystitches are too big this part feels really backwards when we think about it but we want 18 stitches to reach 4 in if I were to measure 18 stitches that would be reaching 4 in and a quar somy stitches are too big so for me to get the exact gauge most likely what needs to happen is that I need to go down a needle size or even two needle sizes the thing we haven't done yetis to measure this blocked and I'm pretty sure once I block this my stitches are going to be slightly bigger they might be the same but usually when I block things I'm getting a little bit of extra length
and width to my fabric so so my true gauge might end up being something like 16 stitches equals 4 in and then I'm way off I'm like uh a half inch off for every 4inch measure so this iswhy it's important if I'm measuring across 18 stitches or 17 stitches right now in the body of my sweater when I cast on I might be casting on something like 200 or 250 maybe 300 stitches and in allof those stitches if every 4 inches has an extra4 inch across 50 in of my measurement that's going to be a lot of extra fabric and my sweater will end up being way too big so this is whywe Swatch let me block this I'll come back we'll measure it blocked and then we'll talk about what we do to keep the same yarn maybe keep the same needle size if we really like the fabric and then
how we get to a sweater that fits us the way we want all right I'm back with a blocked Swatch and hopefully you can tell how much more even it is I think the stitches here look really beautiful
5. Substituting Yarn and Adjusting Gauge Math
Using the Seaglass cardigan as an example, shows how to substitute fingering yarn for DK, calculate stitches per inch, and work through pattern sizes to find the right fit with a different gauge.
and they didn't look this good just for my knitting this is really the result of blocking and you'll still see that it's translucent and we already know from our first measure that this Swatch is too big that ourstitches are too big to reach the gauge needed so that also might be playing into the translucence if I went down a needle size or two I would probably end up with a firmer more filled out Fabric andI might like that so let's take a couple of measurements now that this is blocked there I'm still getting 17 and let's go to another part of the Swatch and there I got 16 so this information still leadsme to the same conclusion I'm not getting gauge so the next step would be to go down a needle size and continue working an additional stretch of fabric if I don't want to keep this fabric I could pull
it back but I would like to at least keep what I've done until I've finished all of my swatching so I could end up with a Swatch that's just longer like a little scarf then once I compare andcontrast the fabric the measurements I'll decide which needle size is going to be best for the project so let's Zoom forward and look at how we adapt a project to use a different yarn a different needle size ifwe're not getting gauge at this point I've brought out some of my Seaglass SWAT es this is my current project that I'm about to cast on for the makeal that I'm running and I've chosen to make my versionout of a fingering weight yarn when the pattern calls for DK and the DK weight they call for and the fingering weight I'm using are not close enough sometimes that might be the case depending on what a designer
has used and what you have in your stash or what you have access to locally but in this case they're truly two different weights it's a clear difference and so I'm not getting gauge there's no way I'm goingto get it I don't want to get gauge I don't want to keep going up in Needle size until I reach it because then my fabric I'm creating will be too wholly translucent it'll have too much drape Istill want a sort of solid piece of fabric so because I like this yarn because I have access to it at my local shop I'm going to make adjustments and use a complete different weight of yarn and stillmake the same pattern all of this starts the same way where we need to take measurements so I'm going to use my tape measure because it's the easiest for me to read against the fabric and I'm going to
take a measurement here in this Swatch I got 26 stitches on my first measure to 4 in so now I'll go to a different part of the Swatch and do the same thing that time I got 25 soI'll keep doing this a couple more times to see what our true rounded out measurement is I'm getting between 25 and 26 stitches on each measure and I know that once this is in a larger form and there'smore weight gravity is pulling on the sweater things will drape slightly more so I think my safe measurement is going to be 26 stitches equals 4 in we're back on rivalry to look at this pattern this is theSeaglass cardigan from wool and pine once I'm here we're going to look for the same information DK weight yarn I know I want to substitute that for fingering weight yarn and then their gauge is 20 stitches equals 4
in in stock AET stitch in the round I was already doing my swatch in the round so that's taken care of because I've chosen a different weight of yarn it's completely up to me what needle size I useif you go somewhere drastic if the sweater calls were worsted and you want to do it out of fingering weight because you really want to for whatever reason you're not going to start swatching with the same needle usedfor worsted weight you're going to come down to a needle that makes sense for your yarn and it might take some trial and error to find a fabric and a gauge measurement that you like since you're making thatadaptation so now let's do a little bit more math they have 20 stitches equaling 4 inch that's the goal I have 26 so our gauge is drastically different so what do we do from here to make sure that
the gauge we've achieved is going to result with a sweater that fits us well now that I have an honest measurement of my swatch let's do the math to see how many stitches are in each individual inch sowe had 26 stitches across four inches I'll take 26 and divide that by four and that's going to result in 6.5 stitches per inch so I'll make sure to write that down and we're not going to do anycrazy math here we don't need to plug in any special equation to figure this out instead we're going to look at the different sizes is available in the pattern and see how many stitches they have at the widestpoint the largest point of the body so that might be around the bust that might be around the stomach depending on the shaping of the sweater I can't show you this pattern on camera because it's a paid pattern
but I'm going to scroll through off camera just to see what those Stitch counts are for the body of the sweater the starting point is going to be my actual size if I were get engaged I would probablymake the sweater that ends up being 55 to 56 in in circumference my measurement is about 52 in so I want three or four inches of positive ease so I'm going to start with that size I know it'snot going to be right because my stitches are so much smaller but we'll plug in the math and then keep going up in size until we find a sweater that's going to fit me one of the size optionsprescribes having 342 stitches in the body circumference of the sweater that's once we've reached the underarms and separated the sleeves off for this sweater so if I take 342 and divide that by 6.5 I'm left with
52.6 so this still isn't going to be big enough my target is to reach something like 56 in and unfortunately that's the biggest size we get to in the sweater now Woolen Pine is not creating a pattern fora sweater that can only go up to a measurement of 52 in their pattern can actually go up to 68 in it's because I'm using such a lighter weight yarn that the measurements are now quite different now whatI need to do in this situation and this is all because I'm going off course I'm choosing different yarn it's going to affect my gauge drastically I'll need to keep increasing and increasing for The Ragin style of thissweater until I've reached the appropriate number of stitches or measurement to fit my body and this leads me to the next bit of information that is one of the most helpful things and that is trying on your garment
6. Trying On as You Go for Fit
Emphasizes trying on the garment throughout the making process, checking neckline, armhole depth, body length, and sleeves, and making adjustments or seeking help when needed.
constantly throughout the making process if you're making something top down it's very easy to try it on you can use scrap yarn or Stitch saver Barber cord like I showed earlier and after you have a couple of inchesaround the neckline slide your stitches onto that Stitch saver and try it on if the neck opening is way too big or a little too tight you could stop there and choose a different size reassess instead of waitinguntil you've made the whole sweater and then realizing that you're unhappy with a certain part of it once you get to the armhole depth that's the biggest place that I think you need to make sure the sweater isdeep enough uh you don't have arm holes that are way too high up under your arms and on the opposite side of that you don't necessarily want a sweater where the arm holes are way too low you might
want them to sit at a very specific point so when you approach that point of your pattern put it on Stitch saver put this put the Garment on scrap yarn and try it on have a friend help adjustit look in the mirror really make sure you're happy with it before you move on with the next step and solidify some of the shaping of that garment the same thing is true for the length of the bodyI really find it to be true with sleev and typically with sleeves you don't even have to slide the stitches onto anything if you're using double pointed needles or a longer pair of circular needles for magic loop youcan just slide your arm through and take a look do you have too much fabric too little and you can gauge how the length is going for almost every sweater I make I shorten the sleeves I typically increase
the frequency of my sleeve shaping I don't like my sleeves to have too much extra fabric and because I like the shorter the prescribed decreases might take way too long for me to reach that so I'll do themath I'll see how many stitches I really want in my sleeve so that it matches the measurement I like that I'm comfortable with and then I'll make those adjustments as I go the biggest thing for sleeves is becauseyou'll do two of them write everything down if I pick up a different number of stitches if I'm decreasing at a different rate I make notes of that usually just on my phone because it's always near my craftingbag and then once I finished the project I try to write that stuff down on my pattern just in case I make it again in the future everyone's bodies are so different people have drastically different lengths of torsos
in comparison to your bust measurement or the uh width of your shoulders anything like that so no one pattern no single pattern is going to have the perfect proportions for every type of person so I think it's soimportant to try your sweater on you can do all of this for bottomup construction as well it's so important to try it on as you go and make those adjustments if you're not comfortable making the adjustment yourself youcould go to a local shop and see if they have teachers or owners that are willing to help you maybe it's something you can set up as a lesson time or an appointment for help and if you don'thave that locally you can probably find people online you could reach out to people on rivalry you could reach out to people on YouTube people on Instagram whatever social space you use for Fiber Arts you can probably find
someone who's willing to help do some of that adjusting for you to customize the fit of whatever you're making there's obviously so much that goes into making a garment and specifically making a garment that fits you in theway that you like so it's best to read a pattern all the way through read notes and com comments on someone's pattern uh if it's something on rivalry there's a whole tab for that and then use your judgmentas you work if something looks like it's not um shaping out correctly if it's got lumps and it's pulling the wrong way if something doesn't look like it's going to actually fit you stop what you're doing try iton slip the stitches onto something else and then make adjustments and that might mean pulling back it might mean starting over but hopefully it's going to save you loads of time loads of money and loads of frustration for
people that like to substitute Yarns frequently and make patterns out of different weights of yarn there's a great tool a couple different versions of this online where you can go in plug in what you're getting for your gauge
7. Gauge Calculator and Row Gauge Discussion
Demonstrates an online gauge adjustment calculator from Knitter's Kitchen and explains that row gauge matters less than stitch gauge for most patterns, especially when measurements guide length.
measurement and they'll do the math for you so I'm going to show that briefly for those that want to use a tool like that in the future and then I'm going to show just a couple of things thathave to do with swatching for the Seaglass sweater cardigan Seaglass projects that pertain to my current makeal so if you're not participating in that if you've had enough time with me today I'm not offended if you scoot alongbut for those people that'll come up at the end of the video this resource is super helpful and a super timesaver for people that like to substitute their weights of yarn for different projects so I'm on knitter's kitchena blog post about knitting math and recalculating your size now you can go to this site make sure that that you give the traffic where the traffic is due go click on the link if you want to read
this article and reference it for your future projects but I'll show you a sneak peek of one of the features that's really invaluable this page includes a calculator specifically for adjusting gauge so you'll start by plugging in theexpected gauge of the pattern the gauge you've achieved and then your bust measurement and it will tell you exactly which size you should make instead of the size that you measure so let's plug this in for my SeaglassSwatch just to see what it tells us the expected gauge from the pattern was 20 stitches to 4 in my gauge is around 25 stitches per 4 in and then size information my chest size is a 50 to52 so I'll say 52 which then tells me the size I need to make is the size that ends up measuring 65 in so that's not the size measuring 65 in with the ease that's just the measurement the
body measurement of 65 in so I could take this information write it down to remember exactly what adjustments I need to make and which size I should follow in the pattern so depending on what results you get fromyour gauge Swatch you can plug it in to this calculator you could do the math on paper and then look through the sizes and then you can just choose a size that's larger than your true measure or smallerthan your true measure and without having to do too much adjusting end up with a sweater it's going to fit now the next thing to consider is that your Stitch gauge your width of stitches isn't necessarily going tocorrespond to the height of Stitch or the row gauge in an even proportion so row gauge does play a role but it plays less of a role than Stitch gauge and if you go read this article which I
think everyone should um you'll see that that's mentioned here typically when you're gauging to use the word when you're gauging the length of something a pattern will have you knit or crochet until your work measures X number ofinches usually they're not saying knit 200 rows and then bind off they're saying knit until the project measures 16 inches and then bind off so if that's the case and that's how the pattern is written then you reallydon't need to depend on your Rog gauge quite as much it does make a difference for things like color work for things like um the rate of increasing or decreasing for shaping so if you've made a drastic differencea drastically different choice in what you'll use then it's something to consider and again trying your work on constantly will help with that but the biggest thing we want to know about is our Stitch gauge we want to
make sure that the circumference of whatever we've made is relatively close to what we had in mind we don't want a sweater that is too tight and we don't necessarily want a sweater that's way too oversized if thatwasn't Our intention hopefully I've shared something today that will help you in your future knit and crochet projects with achieving the perfect fit I know that my tension my regular gauge is always a bit looser than sort of
8. Color Work Swatching Techniques Demo
Shows slow-motion close-ups of Continental one-by-one color work, securing swatch edges by knitting with doubled strands, and adding third and fourth colors to a swatch.
average tension so typically I go down a needle size for projects to hit gauge or if I like the fabric I'm creating I use the calculator I showed you and the style of calculations to make a different sizethan my true measurement and all of those things put together result in garments that fit me well that I really enjoy wearing so if you're not already taking the time to Swatch and give just a little bit ofthought in figuring out what's going to be the right track for your project I would recommend taking the time to do it I think it makes a huge difference saves a lot of time saves a lot of frustrationso I'm going to show a couple pointers for swatching for the Seaglass projects for those people who are joining me for my makeal if that's not you I really appreciate you being here today and if it is you
let's take a look at those things before I say goodbye so I received just a few requests that I thought I'll show on camera in this video because they still pertain to swatching and making making sure that youhave a good handle on this one by one color work so the first will be slow motion up close view of how I'm rocking back and forth for my Continental hold of the one by one color work andwhile we do that while we achieve it we'll also look at securing the edges of these swatches so I've cut all of my Tails because I wanted to start fresh I've been carrying the Swatch around Etc so I'mgoing to add in my main color and a contrast to get started so if I'm starting with two colors I just put the two tails together and I give myself just a couple inches so that they're not going
to pop out of the project and then I squeeze that to Anchor it as I get started so I'm going to go into my first Stitch and I'm going to knit with both strands together for three stitches thismakes the project bulkier but it's going to help secure this Edge now that I have those three stitches I'll start to rock back and forth between the two colors I'll tension the two colors over my pinky so justwrapping them around once and then I will take my background color of the gray and I'll put it over my pointer finger and then the next color I'll pick up with my middle finger just wedging between those andpicking it up over both are still tensioned around my pinky and from here I'll do my normal Continental knit stitch go into the next Stitch and then Rock just turning my wrist so that the sort of gold mustard
yellow strand makes its way to my needleback to my regular Stitch and now this next Stitch I'll rock again so that I can pull the yarn over the needle and pull through my contrast color and I'll do that across the row in my last swatchingvideo I showed a couple of other ways to hold your yarn this is just because someone has asked me to show it again again close up and in a bit of slowmotion so to show it slowly one more time I have my normal Continental knit stitch then in my next Stitch I'll just rock my hand forward bringing my fingers above the work so that the gold strand is closerto the needle and I've successfully yarned over and then we pull that through I find this to be a really comfortable way to hold the yarn and as I mentioned in the other video it helps me discern which
yarn I'm picking up rather than having them both over my index finger so that I can do this color work pattern without having to look at my work so much I still look down at it but I couldlook up I could have a conversation and keep in pattern now that I'm reaching the end of this row I'll do the same thing that I did at the beginning to secure my yarn for the final three stitchesI'll drop my yarn I'll pick them up as one combined Strand and I'll knit the final three stitches with two strands that's going to help anchor these Edge stitches so they aren't quite so unruly the final request wasto show adding a third or fourth color to my swatching so we'll start by sliding our work back to the other end of the needle and this is again so we're swatching in the round and I need my
main color because I have a main color so I'll need to do my estimation of three times the width it's three times here and not four because I'm only using this the color for every other Stitch if Iif I were doing stock a net stitch like earlier in the video I would take about four times the width now I'll add in my next color so I start by pinching the contrast color just like I pinchedour two strands last time now that the main color that I'm repeating is pinched over on the side I'll take my next color which is blue and I'll add it in the same manner where I have just acouple inches of tail and that will get pinched together with the gray now just like before I'll knit the first three stitches The Edge stitches of this Swatch with both
colors and then I'll set up my hold to knit this Row in one by one color work I'll be consistent keeping the main color over my index finger and my contrast over the next
finger and then I work across as normal and the only thing special we had to do was pinch the color at the edge of the row and work just a few stitches to secure it I'll finish this rowand then I'll show adding one more color and that'll be it for today all right let's slide this back and add in one more color so I'll start by inserting my needle I I like to do this firstto get set up my main color is already attached but I need to add a new color so again I'll take just two or three inches of the tail pinch it at the edge of my work and I'llwork the first three stitches holding both strands together once that's secured in the work I'll set up to do my two color color work again with the main color over my index finger and the contrast over my middle
finger and I'll work as normal the only special thing to add a new color is to make sure that it's secured at the edge of the row after that you're fine all right I think that's everything I wanted
9. Closing Thoughts and Make-Along Info
The host wraps up with thanks to viewers, details about the make-along newsletter, and an invitation to share tips in the comments.
to cover for today I'm not sure how much this will edit down to but I imagine it might be kind of a sprawling video so if you've made it this far thank you I appreciate you being here ifyou're part of my makeal then I'm excited to be knitting and crocheting with you hopefully you've signed up to be part of it if not that link is in the description box below this video and once you've signedup you'll get a newsletter from me I've only sent one newsletter out so far the next batch will come out this week with the next steps information about when we cast on how we do that together and anyother helpful resources that I think might Aid you in the process to anyone watching I'm so grateful that you've chosen to spend some time with me if you have feedback if you have your own great tips and ideas
of how you make garments how you make objects that fit and work out to be the right measurement let me know in the comments as I said at the beginning of the video so many of you are absolutelybrilliant crafters and I love the wealth of information that you're willing to share with me and anyone else who reads through these comments so as always thanks for being here happy knitting happy crocheting happy crafting to you andhopefully I'll see you in the next one bye