# Pop-Up Cards Tutorial - The Cube Shape

**Channel:** Square Type
**Source:** https://www.youtube.com/watch?v=hyko8o_E49E
**Transcript page:** https://www.withtranscript.ai/video/hyko8o_E49E

## Chapters

- 0:24 — Materials and Square Preparation
- 1:36 — Cutting and Shaping the Cube
- 5:11 — Building the Rectangle Stand
- 7:57 — Assembling the Popup Card

## Transcript

**[0:24]:** hey there hey there thanks for watching Square type I'll be showing you how to make a cute popup in a greeting card here's the materials list I've gone over making paper squares and rectangles in another video the link is above most of my popups are are using the same techniques of making squares and rectangles so I don't want to bore you with the same exact information in all of my videos please check out the link above if you don't know how to make a square rectangle um of a specific size a cube is a square and all sides on a square equal that is equal in length and width a cube has the added equal dimension of depth as I mentioned above I'm going to gloss over making a paper Square quickly here the square is the base shape for making a cube once I have the square like this I'll press it flat and

**[1:25]:** fold it over so that only one side of the square is showing

**[1:36]:** so here the edge is now the measure of all the sides of the cube I'm going to make so to make the cube I just have to mirror the sized Edge um by making the following folds first I'll fold it over to make a right triangle with a top point at the top corner and the side lines up with the edges of the fold here then push the tail back to make the second fold down so that the triangle two sides line up with the edges of the folds behind it here and here now open up the triangle so that it's a square and then I can push the tail back again uh to line up with all three edges of the square here here and here now I can simply cut off the remaining tail and I have a square so um it's a 5x5 uh cm square yay okay opening this up you'll

**[2:49]:** see that I have three rows uh two colums with three rows in each on the second column at the top row cut out that Square by following the fold

**[3:14]:** lines also on the same second column cut out the bottom

**[3:26]:** Square now I have one column that has three squares and the second column that has one square I'm going to work with a column that has three squares think of these as the top middle and bottom of the cube the bottom is where I'll make the tabs to attach to the card I'm not making Cuts in the middle right here I'm not going to make any Cuts there um but I'm going to make a cut here at the bottom I'll cut out a uh slim section next to the fold line like this and then from that side corner I'm going to cut a downward diagonal like this now I have my two triangle tabs let me open this up so you can see them they kind of look like bad ears at the top um at the top I need to cut the two squares apart by following the fold line like this

**[4:37]:** then notice how the tabs below are pointing inward make one more diagonal cut at the top square also pointing inward like this this cut will make it easier to close the top of the cube we'll glue that up later I'm going to fold all these flaps that I made over just so you can see the middle section of the cube this is where the rectangle stand is going to be attached so I'm just making sure that

**[5:11]:** it's still 5 cm tall for a 5 cm Cube I'll need a 5x 2.5 cm rectangle stand so my calculation shows that I'll need a piece of card stock that's 15 cm long

**[5:31]:** I'm going to make the rectangle stand really quickly here again check out the link above um for detail instructions if you don't know how to make a specific size rectangle the two marks and lines that I've created here are the 15 cm and 5 cm down from there and that'll help me make the correct size rectangle

**[6:01]:** so now I should have a rectangle that's 5 cm by 2.5 cm and I can cut out a section of that to use as my rectangle stand for my Cube see how the two triangles are on either side of the square this is where you want to place your rectangle stand inside the cube let me just show it um outside just so you can see how it's going to stand when it's inside of the cube it's going to be attached on one of the long ends and then the two short ends are going to shift back and forth to closed and open so uh just putting glue along the long side of a of the stand and then folding it flat and then placing it inside the cube here um you want to take the corner of the stand and match up that crease with the fold line of the tab like this of the

**[7:04]:** little bat ear tab see how it's lined up there now you can make the stand um you can push the stand over and uh it'll stand like a rectangle so that's exactly what you want and the stand can shift back and forth which is good um so now uh put with the bat ears up up put some glue on the short end of the rectangle stand and push the stand flat like this onto the bat ear so now when you shift that um that stand the bat ear will close which is great it's a good time to join the pieces of the top of the cube Cube together um you just need to place

**[7:57]:** this triangle on top of the fold it so the triangle is on top of the square and put some glue on there I'm using a glue stick so it doesn't wrinkle and then just fold over the square on top of the re of the triangle so you have a triangle that's going to be the top so now it's finally time to start attaching the card to the shape or the shape to the card so just put some glue on one of the baders on the outside and then line up that diagonal relief that we cut out uh to the fold of the card and then put glue on the on the top that ear like this and then close the card and we're almost done so under the top you'll see the rectangle stand just put glue on that part just on the top of the stand there I'm using hot glue cuz it it

**[8:57]:** dries really fast and then then press the top down to the stand and when it's attached kind of fold the card and help the that crease kind of fold in so that the stand can do its job and there it is Tada it's a cube the rectangle stand helps prop up the cube top to the line um you know that you need it to be and uh when the card closes that rectangle stand is going to pull the top down so it folds shut check out my other popup videos on my channel Square type thanks for watching bye
