Transcript
Use with ChatGPT / Claude Auto-scroll A
Introduces the popup cube project and reviews the basic square and rectangle shapes needed. The speaker quickly explains how to prepare the paper square that will become the cube base.
hey there hey there thanks for watching Square type I'll be showing you how to make a cute popup in a greeting card here's the materials list I've gone over making paper squares and rectangles in another video the linkis above most of my popups are are using the same techniques of making squares and rectangles so I don't want to bore you with the same exact information in all of my videos please check out the link aboveif you don't know how to make a square rectangle um of a specific size a cube is a square and all sides on a square equal that is equal in length and width a cube has the added equaldimension of depth as I mentioned above I'm going to gloss over making a paper Square quickly here the square is the base shape for making a cube once I have the square like this I'll press it flat and
fold it over so that only one side of the square is showing
Shows how to fold, cut, and trim the paper into a cube net with tabs and top flaps. The speaker explains which sections become the cube sides and where the attachment tabs should be placed.
so here the edge is now the measure of all the sides of the cube I'm going to make so to make the cube I just have to mirror the sized Edge um by making the following folds first I'llfold it over to make a right triangle with a top point at the top corner and the side lines up with the edges of the fold here then push the tail back to make the second fold down sothat the triangle two sides line up with the edges of the folds behind it here and here now open up the triangle so that it's a square and then I can push the tail back again uh to lineup with all three edges of the square here here and here now I can simply cut off the remaining tail and I have a square so um it's a 5x5 uh cm square yay okay opening this up you'll
see that I have three rows uh two colums with three rows in each on the second column at the top row cut out that Square by following the fold
lines also on the same second column cut out the bottom
Square now I have one column that has three squares and the second column that has one square I'm going to work with a column that has three squares think of these as the top middle and bottom of thecube the bottom is where I'll make the tabs to attach to the card I'm not making Cuts in themiddle right here I'm not going to make any Cuts there um but I'm going to make a cut here at the bottom I'll cut out a uh slim section next to the fold line like this and then fromthat side corner I'm going to cut a downwarddiagonal like this now I have my two triangletabs let me open this up so you can see them they kind of look like bad ears at the top um at the top I need to cut the two squares apart by following the fold line like this
then notice how the tabs below are pointing inward make one more diagonal cut at the top square also pointing inward like this this cut will make it easier to close the top of the cube we'll glue that uplater I'm going to fold all these flaps that I made over just so you can see the middle section of the cube this is where the rectangle stand is going to be attached so I'm just making sure that
Calculates the correct stand size and demonstrates making the rectangular support piece. The stand is glued into the cube so it can open and close with the card.
it's still 5 cm tall for a 5 cm Cube I'll need a 5x 2.5 cm rectangle stand so my calculation shows that I'll need a piece of card stock that's 15 cm long
I'm going to make the rectangle stand really quickly here again check out the link above um for detail instructions if you don't know how to make a specific size rectangle the two marks and lines that I've created hereare the 15 cm and 5 cm down from there and that'll help me make the correct size rectangle
so now I should have a rectangle that's 5 cm by 2.5 cm and I can cut out a section of that to use as my rectangle stand for my Cube see how the two triangles are on either sideof the square this is where you want to place your rectangle stand inside the cube let me just show it um outside just so you can see how it's going to stand when it's inside of the cube it'sgoing to be attached on one of the long ends and then the two short ends are going to shift back and forth to closed and open so uh just putting glue along the long side of a of thestand and then folding it flat and then placing it inside the cube here um you want to take the corner of the stand and match up that crease with the fold line of the tab like this of the
little bat ear tab see how it's lined up there now you can make the stand um you can push the stand over and uh it'll stand like a rectangle so that's exactly what you want and the stand canshift back and forth which is good um so now uh put with the bat ears up up put some glue on the short end of the rectangle stand and push the stand flat like this onto the batear so now when you shift that um that stand the bat ear will close which is great it's a good time to join the pieces of the top of the cube Cube together um you just need to place
Finishes by closing the cube top, attaching the cube to the greeting card, and securing the stand. The final result is a popup cube that rises when the card opens and folds flat when it closes.
this triangle on top of the fold it so the triangle is on top of the square and put some glue on there I'm using a glue stick so it doesn't wrinkle and then just fold over the square ontop of the re of the triangle so you have a triangle that's going to be the top so now it's finally time to start attaching the card to the shape or the shape to the card so just putsome glue on one of the baders on the outside and then line up that diagonal relief that we cut out uh to the fold of the card and then put glue on the on the top that ear likethis and then close the card and we're almost done so under the top you'll see the rectangle stand just put glue on that part just on the top of the stand there I'm using hot glue cuz it it
dries really fast and then then press the top down to the stand and when it's attached kind of fold the card and help the that crease kind of fold in so that the stand can do its job andthere it is Tada it's a cube the rectangle stand helps prop up the cube top to the line um you know that you need it to be and uh when the card closes that rectangle stand is going topull the top down so it folds shut check out my other popup videos on my channel Square type thanks for watching bye